Being subject to frequent noise on your car tends to be disturbing, a car is so sophisticated that it is generally difficult to locate its origin and even more so to find the part that generates it. If you have already experienced a clicking noise on your Jeep Grand Cherokee, we will most likely be able to help you. In fact, our editorial staff decided to write this content page in order to review the main causes of a clicking noise on Jeep Grand Cherokee. This is why, firstly, we will check out what are the origins of this type of noise coming from your engine block, then those of a noise coming from your direction and finally, the sources of clicking noise on Jeep Grand Cherokee coming from your suspensions.
I discover a clicking noise on Jeep Grand Cherokee from my engine
Check your high engine
If you discover a clicking noise on Jeep Grand Cherokee, and this noise is based at the top of the engine, it means that it comes from your cylinder head and its accompanying parts. Two parts can be the causes of these ticking noises on Jeep Grand Cherokee. Either the hydraulic pushers , in general it is because of their faulty “hydraulic catch-up” system that we will perceive these clicking noises, often when cold and disappear when hot. Otherwise, it is the interplay of your rocker arms or their state of wear that is at issue. In this case, remember to change them.
Check your low engine
If you have identified the region of source of the Jeep Grand Cherokee clikcing noises coming from your low engine, it may be that your rods or piston shafts are the causes. In both cases, the risk in the long term is the breakage of the motor. These two maintenance are very difficult and most mechanics will recommend you to replace the engine of your Jeep Grand Cherokee.
Combustion problem
Finally, if you have the feeling that this clicking noise on Jeep Grand Cherokee is related to the combustion of your engine, there are three possible causes of it. Check the state of your glow plugs which, if worn, can hinder the proper combustion of the fuel mixture. Then, it is conceivable that your timing belt is shifted and that it does not properly manage the timing of the various engine components to promote good combustion. And finally, the most classic reason, comes from your injection, which is either blocked or one or more injectors are destroyed. In this circumstance, do not hesitate to consult this content page which deals in detail with the different injection sounds on Jeep Grand Cherokee.
I discover a clicking noise on Jeep Grand Cherokee in my direction
Check the state of the gimbals
One of the most basic causes of a clicking noises in the direction of your Jeep Grand Cherokee is linked with the direction of the car. Indeed, the cardans and their bellows are parts that are constantly stressed during your changes of direction or that you turn your wheels and a wear of one of them can create a ticking type of sound when you get closer to the stop zone of your steering. A bellows with holes will damage the cardan shaft very quickly and must be changed very quickly, otherwise the entire cardan shaft will have to be changed. Consider taking a look at it. If you would like more detailed information about gimbals noises on Jeep Grand Cherokee, do not hesitate to consult this complete guide.
Check the rest of your direction
Finally, when you detect a clicking noise on your Jeep Grand Cherokee, it is conceivable that it is the direction that is involved. Just like the gimbals, the steering part is mobilized when you turn your wheels. If this is the circumstance, the parts that may have been damaged due to normal wear and tear or impact (e. g. sidewalks) are steering rods, stabilizer bar silentblocks or steering triangles.
I discover a clicking noise on Jeep Grand Cherokee coming from my suspensions
Check the suspension
If you experience a clicking noise on your Jeep Grand Cherokee when you pass a speed bump, it is very conceivable that your suspension block is the induce of the noise. In fact, it may be the suspension cups, which, when they are dead, have the rubber (silentbloc) that acts as a buffer and shock absorber for the upper part of the suspension that no longer fulfils its function and during small jolts that compress the suspensions. To check if this is the trouble that concerns you, take a dented road and, at low speed, pay attention to the noise originating from your front axle when you pass over holes. If these are the cups, consider changing them as soon as possible as this may affect other parts and require more expensive repairs.
Check spring and cylinder
If you are subject to a clicking noise on your Jeep Grand Cherokee at the suspension level, it is widely conceivable that spring wear or shock cylinder deformation may be a reason. To check the shape of the spring, place the car on a flat surface and measure that the heights from the ground to the bottom of the body are similar on each side (empty car for measurement). You can also check between the front and rear, if there is a gap too significant it suggests that that most likely your springs are worn, if you see a leak go a little further in the article to have the answer to this problem. For the cylinder the verification is visual, be sure that it seems to work in a straight axis. And that there is no angle that would alter its proper functioning. If one of them breaks in both situations, you should consider swapping it or them. If you have the feeling that this noise is more like a squeaking noise on Jeep Grand Cherokee than a clicking noise, don’t hesitate to consult this article.
