Being subject to repeated noise on your car tends to be irritating, a car is so complex that it is constantly difficult to locate its origin and even more so to find the part that generates it. If you have already experienced a clicking noise on your Hyundai Veloster, we will probably be able to support you. Indeed, our editorial staff decided to compose this content page in order to review the main causes of a clicking noise on Hyundai Veloster. This is why, firstly, we will look at what are the reasons of this type of noise coming from your engine block, then those of a noise coming from your direction and finally, the origins of clicking noise on Hyundai Veloster coming from your suspensions.
I notice a clicking noise on Hyundai Veloster located on my engine
Verify your high engine
If you notice a clicking noise on Hyundai Veloster, and this sound is based at the top of the engine, it means that it comes from your cylinder head and its associated parts. Two parts can be the triggers of these ticking noises on Hyundai Veloster. Either the hydraulic pushers , generally it is because of their faulty “hydraulic catch-up” system that we will perceive these clicking noises, often when cold and go away when hot. Otherwise, it is the interplay of your rocker arms or their state of wear that is at issue. In this case, remember to change them.
Verify your low engine
If you have identified the region of source of the Hyundai Veloster clikcing noises coming from your low engine, it may be that your rods or piston shafts are the triggers. In both circumstances, the risk in the long term is the breakage of the motor. These two maintenance are very complicated and most mechanics will encourage you to replace the engine of your Hyundai Veloster.
Combustion problem
Finally, if you have the feeling that this clicking noise on Hyundai Veloster is in connection with the combustion of your engine, there are three possible causes of it. Verify the condition of your glow plugs which, if worn, can hinder the proper combustion of the fuel mixture. Then, it is possible that your timing belt is shifted and that it does not properly manage the timing of the various engine parts to promote good combustion. And finally, the most classic reason, comes from your injection, which is either blocked or one or more injectors are injured. In this case, do not hesitate to check this content page which deals in detail with the different injection sounds on Hyundai Veloster.
I notice a clicking noise on Hyundai Veloster in my direction
Verify the condition of the gimbals
One of the most basic reasons of a clicking noises in the direction of your Hyundai Veloster is linked with the direction of the car. Indeed, the cardans and their bellows are parts that are constantly stressed during your changes of direction or that you turn your wheels and a wear of one of them can create a ticking type of sound when you approach the stop zone of your steering. A bellows with holes will harm the cardan shaft very quickly and must be changed rapidly, otherwise the entire cardan shaft will have to be changed. Consider taking a look at it. If you would like more detailed information about gimbals noises on Hyundai Veloster, do not hesitate to read this complete guide.
Verify the rest of your direction
Finally, when you recognise a clicking noise on your Hyundai Veloster, it is possible that it is the direction that is involved. Just like the gimbals, the steering part is mobilized when you turn your wheels. If this is the case, the parts that may have been damaged due to normal wear and tear or impact (e. g. sidewalks) are steering rods, stabilizer bar silentblocks or steering triangles.
I notice a clicking noise on Hyundai Veloster coming from my suspensions
Verify the suspension
If you encounter a clicking noise on your Hyundai Veloster each time you pass a speed bump, it is really possible that your suspension block is the reason of the sound. Indeed, it may be the suspension cups, which, when they are dead, have the rubber (silentbloc) that acts as a buffer and shock absorber for the upper part of the suspension that no longer fulfils its task and during small jolts that compress the suspensions. To check if this is the issue that concerns you, take a dented road and, at low speed, listen to the sound coming from your front axle when ever you pass over holes. If these are the cups, consider changing them promptly as this may affect other parts and require more expensive repairs.
Check spring and cylinder
If you detect a clicking noise on your Hyundai Veloster at the suspension level, it is highly possible that spring wear or shock cylinder deformation may be a explanation. To check the state of the spring, place the automobile on a flat surface and measure that the heights from the ground to the bottom of the body are equivalent on each side (empty car for measurement). You can also check between the front and rear, if there is a gap too large it means that most likely your springs are worn, if you see a leak go a little further in the article to have the solution to this problem. For the cylinder the verification is visual, ensure that it seems to work in a straight axis. And that there is no angle that would alter its proper functioning. If one of them breaks in both situations, you should consider swapping it or them. If you have the feeling that this noise is more like a squeaking noise on Hyundai Veloster than a clicking noise, don’t hesitate to consult this article.
