It is never pleasing to notice a sound on your automobile that you don’t know where it comes from. You may be thinking about what to do when you find a reversing gear noise that lasts on your Honda Accord? Any gearbox trouble can be severe, but before making sure, it is better to do a few inspections. Our team has written this content page to help you solve it. First, we will see what the origins and the different gearbox noises can be on Honda Accord, and second, what are the solutions available to you.
Classical reverse Honda Accord noises and some tips to look after your gearbox
Why does the reversing of my Honda Accord make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult task. The sound generated by the reversing of your Honda Accord is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears more quiet than with spur gears used for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions.
- Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. In fact, the pressure you will put in on the gears will be enormous and you will produce a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely common if you notice a reverse noise on your Honda Accord if you shift gear under these conditions.
Different Honda Accord reversing noises and their triggers
Finally in this section, we will move on to what you are probably most excited about in this content, to learn about the cause of reversing noise on Honda Accord. Here are the 3 typical noises you may be victim of.
I find out a grinding noise when starting in reverse gear
If you notice a grinding noise when you start in reverse with your Honda Accord, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to browse this paper for more details about strut mount noises on Honda Accord.
An increased reverse knocking noise on Honda AccordX
If you are subject to a knocking noise when you are in reverse with your Honda Accord and this noise tends to increase as you gain speed. It is possible that you are experiencing a serious trouble that needs to be fixed very fast before destroying your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears before long. Take your automobile to your auto technician quickly or read this document about gearbox noise on Honda Accord for more data.
I perceive a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Honda Accord reverse gear makes more noise than before, it is possible that filings have been created and are moving around in it. It is therefore time to empty the box.