In some cases your automobile can make noises in the front axle, you are very rarely reassured by this types of noise and you right away tend to think that you will lose a wheel or that the fix will cost you an huge sum. Thus, what if you detect a noise coming from the front end of your Chevrolet Equinox? It may not be much and you can correct the issue yourself, but if in doubt it is better to check before a larger failure takes place. It is with this in mind that we have chosen to compose this content and allow you to locate the issue and find a solution. We will, through few steps review all the elements that can generate noises at the front end of your Chevrolet Equinox. front-axle-noise-chevrolet-equinox

What are the elements that can cause front axle noise Chevrolet Equinox?

Most of our article will focus on finding the element that gives your Chevrolet Equinox front wheel noise. The following is a list of the components that are most likely to be creating it and how to confirm it.

Noise vibration front end Chevrolet Equinox : the shock absorber cup

One of the most classic reason of symptoms on your Chevrolet Equinox front axle noise is advanced wear and tear on your suspension system. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer does its role and during small jolts that compress the suspensions. To check if this is the issue that worries you, take a dented, slow-speed road and pay attention to the noise coming from your front end as you pass over holes. If these are the cups, think about changing them promptly as this may damage other components and require more expensive repairs.

Noise while turning front end Chevrolet Equinox : stabilizer bar

If you find out of a noise on your Chevrolet Equinox at the level of the front end when you are turning flat or climbing on sidewalks for example, it is most likely connected to one of the parts of your stabilizer bar that is defective. To confirm the origin of the issue, you may feel a lack of balance in the direction of the car (it pulls to the left or it pulls to the right). Additionally, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels powerfully, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are dead. In this case, go to your garage.

Front axle noise when turning Chevrolet Equinox : direction triangles

Finally, you may have a noise in the front wheel on your Chevrolet Equinox, when you accelerate, brake or in a rather random but regular way. It is likely that the reason of this issue comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (left triangle pulls to the left) and when braking towards the inside of the same side (left triangle pulls to the right). You can also check the state of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your technician.

Loud noise front end Chevrolet Equinox : bearings

One of the other likely causes of symptoms of the front axle of your Chevrolet Equinox, may be that one of your rollings is tired, it will tend to make a thumping noise that intensifies when it is under stress (turns faster and faster). So make sure you check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case swap it or them promptly. If, on the other hand, this noise only appears with an engaged speed, check out our article on loud noise on Chevrolet Equinox, you will probably find a solution to your issue.

Front end noise squeaking Chevrolet Equinox : cardan shaft

One of the most traditional causes when noise appears on the front axle of your Chevrolet Equinox when you turn with your car is connected to the direction of your car. In fact, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can generate “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Chevrolet Equinox, do not hesitate to consult this article to find the solution to your problem.