It occurs sometimes that your car makes noises from your brakes, you are almost never reassured by this sort of noise and you instantly tend to think that you will have an incident or that the fix will cost you an astronomical sum. So, what if you detect noise from the brake on your Peugeot 208? It most likely is not anything severe and you should have the ability to fix it yourself, but when in doubt, as with such problem your security and the one from other is in question, it is better to examine before a more serious failure occurs. It is with this in mind that we have decided to write this document and give you the opportunity to locate the problem and find a solution. We will go through different steps, review all plausible origins of brake noise on Peugeot 208, and deliver you the reasons for them in order to help you solve the problem.
The different kind of brake noise Peugeot 208 and their causes
The objective of the Peugeot 208 brakes is to come slow down and stop your car. This element is an fundamental component of your vehicule’s safety. Experiencing a sound from it must therefore be looked into immediately and leaving it lying around is not a good solution.
I hear a grinding noise on my brake Peugeot 208
If you listen to a grinding or scrap metal noise coming from the brake of your Peugeot 208, it is highly imaginable that it will be linked to brake pads at the end of their life, indeed, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out with time. Each manufacturer gives an average runtime in kilometres for pads, but according to your driving style and route, this may differ. Take off the wheels in question and examine the wear indicator on them. If they are expired, they must be swapped quickly as they will promptly affect your discs and keep doing this scrap or grinding noise on Peugeot 208. If after checking this point, you’re still enduring a grinding noise on your Peugeot 208, have a look at this article to find a solution.
I encounter a continuing noise that stops when I brake with my Peugeot 208
If you experience a continuous noise from the brakes Peugeot 208 that only ends when you press your brake system, it is quite plausible that caliper wear is the cause. Indeed, they can jam with time, specifically if they are not employed enough. In such a case, they will tend to keep on being in the closed situation, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and precipitate deterioration of your pads. To verify it, try to brake many times frankly to try to unblock them. If this does not function, it will be necessary to consider changing them.
I encounter vibration when I brake with my Peugeot 208
If in your case, you encounter a vibration when braking that would have come from the brake your Peugeot 208, you will have to get worried about the state of your discs. Discs tend to wear over time and although they have a longer life than pads, they must be changed at some point. A vibration most often shows of veiled brake disc, you can examine it by disassembling your wheels. If so, swap them or have them replaced by your auto technician.
I experience a squealing noise when I brake with my Peugeot 208
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Peugeot 208, producing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
