If you too have already discover a grinding noise on Peugeot 208, you must have wondering the same questions as all Peugeot 208 owners. We are rarely reassured when a grinding noise shows up on our automobile. As we are conscious of your doubts and questions, we have decided to write this content in order to assist you in and ease your search for a remedy to your issue. To do this, first we will see what the sources of a grinding noise on Peugeot 208 are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Peugeot 208 that comes from the shock absorbers and to finish from one of your doors.
I hear a grinding noise on Peugeot 208 when I turn the wheel
First, we will look into the grinding noises on Peugeot 208 that arise once you turn the wheel of your automobile. Here are the main reasons for this:
- Hydraulic system
- Bearings
- Steering pump
- You have an oil leak at a shock absorber, it is up to you to verify that there is no oil leaking from your shock absorbers.
- You may encounter abnormal wear and tear on one of the seals. This would cause an oil leak
- Finally you can have one of your shock absorber cylinders deformed, which will generate a grinding noise on Peugeot 208
If you feel grinding noises on your Peugeot 208 when you turn the wheels, it may be linked to the hydraulic system of your automobile that allows you to operate the entire power steering part. In such a case, the main point to verify is the power steering fluid level, which if below the normal level could be a signal of a leak of the device. In this case, please remember to redo the level and verify it frequently. If the issue continues, go to your mechanic.
“A grinding noise on Peugeot 208 when I turn the wheels of my automobile” can also originate from premature wear of your bearings. In fact, bearings play an essential role in the good behaviour of the automobile when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can generate sounds close to a grinding if they are worn. Bear in mind to verify their state.
Finally, a grinding noise on Peugeot 208 when I turn may be linked to a tired steering pump power steering pump. The mission of this organ is to function the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may arise between it and the belt. Bear in mind to verify that it is working properly.
If despite these different possibilities you continue to notice a grinding noise on Peugeot 208 when turning your steering wheel, we have created a complete content on this subject that can help you locate the origin.
I hear a grinding noise on Peugeot 208 when braking
If you hear a grinding noise from the brakes of your Peugeot 208, it is highly possible that it will be related to brake pads at the end of their life, actually, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but depending on your driving style and route, this may vary. Take out the wheels in question and verify the wear indicator on them. If they are dead they will have to be replaced promptly because they will promptly damage your discs.
If, despite verification, your grinding noise on Peugeot 208 does come from your brakes but is not linked to the pads, verify this content to find out the other plausible sources of brake noises on Peugeot 208.
I hear a grinding noise on Peugeot 208 at the shock absorbers
If you are in the scenario where you find the grinding noise on Peugeot 208 as coming from the damping part of your automobile, whether you are driving over a retarder, on a bumpy road, or simply when you change direction and the vehicle’s mass is swung from one side to the other. In this case, there are several reasons that can explain this noise. In fact, you will have to verify some points, here they are:
at each compression.
Once you have checked out all these elements, you should have found the origin of your problem, go to your motor mechanic to repair the faulty component. If you have not identified the origin of your issue, we encourage that you take a look at this content which discusses all possible origins of shock absorber noise on Peugeot 208.
I hear a grinding noise on Peugeot 208 at a door
If that’s not enough, don’t hesitate to read this full content on door sounds on Peugeot 208.
It is plausible, determined by the kind of of noise you know, that the hinge of your door is at the origin of these noises. If this is the case, you will have to check it by opening your door and verifying that
