It happens in some cases that your car makes noises from your brakes, you are pretty much never reassured by this types of noise and you immediately tend to think that you will have an accident or that the repair will cost you an astronomical sum. So, what if you identify noise from the brake on your Ford S-max? It may not be anything serious and you would have the capability to fix it yourself, but when in uncertainty, as with such issue your security and the one from other is in question, it is better to verify before a more serious failure occurs. It is with this in mind that we have decided to compose this article and give you the opportunity to find out the issue and find a solution. We will go through different steps, review all possible origins of brake noise on Ford S-max, and deliver you the reasons for them in order to support you fix the issue.
The different types of brake noise Ford S-max and their causes
The objective of the Ford S-max brakes is to come slow down and stop your vehicule. This component is an essential component of your car’s safety. Hearing a sound from it must therefore be investigated quickly and leaving it lying around is not a good choice.
I perceive a grinding noise on my brake Ford S-max
If you listen to a grinding or scrap metal noise coming from the brake of your Ford S-max, it is highly conceivable that it will be connected to brake pads at the end of their life, actually, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each company gives an average runtime in kilometres for pads, but based on your driving style and route, this may fluctuate. Remove the wheels in question and verify the wear indicator on them. If they are out of date, they must be swapped quickly as they will quickly ruin your discs and keep doing this scrap or grinding noise on Ford S-max. If after verifying this point, you’re still enduring a grinding noise on your Ford S-max, have a look at this article to find a solution.
I encounter a constant noise that stops when I brake with my Ford S-max
If you notice a regular noise from the brakes Ford S-max that only stops when you press your brake system, it is quite conceivable that caliper wear is the reason. In fact, they can jam over time, specifically if they are not employed enough. In this case, they will tend to stay on in the closed situation, so they will always stick the pads against the discs, which will lead to an increase in consumption and premature deterioration of your pads. To verify it, try to brake many times frankly to try to unblock them. If this does not function, it will be necessary to think about changing them.
I encounter vibration when I brake with my Ford S-max
If in your case, you encounter a vibration when braking that would have come from the brake your Ford S-max, you will have to feel concerned about the state of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be swapped at some point. A vibration most often notifies of veiled brake disc, you can verify it by disassembling your wheels. If so, replace them or have them replaced by your technician.
I notice a squealing noise when I brake with my Ford S-max
Finally, if you feel a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Ford S-max, creating a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
