It occurs sometimes that your automobile makes noises from your brakes, you are rarely reassured by this types of noise and you automatically tend to think that you will have an accident or that the repair will cost you an substantial amount of money. So, what if you identify noise from the brake on your Fiat Panda 2? It is probably not some thing severe and you should be able to solve it yourself, but when in uncertainty, as with such issue your security and the one from other is in question, it is better to verify before a more serious failure happens. It is with this in mind that we have made the decision to write this article and give you the chance to find the issue and find a solution. We will go through several steps, review all possible origins of brake noise on Fiat Panda 2, and deliver you the causes for them in order to help you solve the issue.
The several sort of brake noise Fiat Panda 2 and their causes
The function of the Fiat Panda 2 brakes is to come slow down and stop your vehicule. This element is an fundamental component of your vehicle’s safety. Experiencing a sound from it must therefore be looked into immediately and leaving it lying around is not a good choice.
I listen to a grinding noise on my brake Fiat Panda 2
If you listen to a grinding or scrap metal noise coming from the brake of your Fiat Panda 2, it is highly conceivable that it will be caused by brake pads at the end of their life, actually, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out with time. Each manufacturer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may fluctuate. Take off the wheels in question and verify the wear indicator on them. If they are out of date, they must be changed quickly as they will quickly damage your discs and keep doing this scrap or grinding noise on Fiat Panda 2. If after examining this point, you’re still going through a grinding noise on your Fiat Panda 2, have a look at this article to find a solution.
I encounter a frequent noise that stops when I brake with my Fiat Panda 2
If you are the victim of a constant noise from the brakes Fiat Panda 2 that only ceases when you press your brake system, it is quite plausible that caliper wear is the cause. Indeed, they can jam with time, especially if they are not used enough. In this case, they will tend to keep on being in the closed situation, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and precipitate deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to reflect on swapping them.
I encounter vibration when I brake with my Fiat Panda 2
If in your case, you encounter a vibration when braking that would have come from the brake your Fiat Panda 2, you will have to get worried about the state of your discs. Discs tend to wear over time and although they have a much longer life than pads, they must be substituted at some point. A vibration most often shows of veiled brake disc, you can verify it by disassembling your wheels. If so, change them or have them replaced by your mechanic.
I notice a squealing noise when I brake with my Fiat Panda 2
Finally, if you ewperience a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Fiat Panda 2, causing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
