It happens sometimes that your automobile makes noises from your brakes, you are certainly not reassured by this sorts of noise and you immediately tend to think that you will have an incident or that the repair will cost you an astronomical amount of money. So, what if you discover noise from the brake on your Fiat Bravo? It might not be anything major and you should be able to solve it on your own, but when in doubt, as with such problem your safety and the one from other is in question, it is better to examine before a more serious failure occurs. It’s with idea in mind that we have chosen to write this article and give you the opportunity to find the problem and find a solution. We will go through different steps, review all plausible sources of brake noise on Fiat Bravo, and give you the reasons for them in order to support you solve the problem.
The different types of brake noise Fiat Bravo and their origins
The objective of the Fiat Bravo brakes is to come slow down and stop your vehicule. This component is an essential part of your vehicule’s safety. Discovering a sound from it must therefore be analyzed immediately and leaving it lying around is not a good solution.
I hear a grinding noise on my brake Fiat Bravo
If you find out a grinding or scrap metal noise coming from the brake of your Fiat Bravo, it is highly possible that it will be linked to brake pads at the end of their existence, in fact, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out with time. Each producer gives an average runtime in kilometres for pads, but according to your driving style and route, this may fluctuate. Remove the wheels in question and examine the wear indicator on them. If they are out of date, they must be swapped quickly as they will quickly ruin your discs and keep doing this scrap or grinding noise on Fiat Bravo. If after looking at this point, you’re still enduring a grinding noise on your Fiat Bravo, have a look at this article to find a solution.
I encounter a continuous noise that stops when I brake with my Fiat Bravo
If you notice a continuous noise from the brakes Fiat Bravo that only ends when you press your brake system, it is quite conceivable that caliper wear is the reason. Indeed, they can jam with time, specifically if they are not employed enough. When this happens, they will tend to stay on in the closed situation, so they will always stick the pads against the discs, which will lead to an increase in consumption and premature deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to reflect on changing them.
I encounter vibration when I brake with my Fiat Bravo
If in your situation, you encounter a vibration when braking that would have come from the brake your Fiat Bravo, you will have to get worried about the condition of your discs. Discs tend to wear over time and although they have a longer life than pads, they must be swapped at some point. A vibration most often informs of veiled brake disc, you can examine it by disassembling your wheels. If so, change them or have them replaced by your mechanic.
I encounter a squealing noise when I brake with my Fiat Bravo
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Fiat Bravo, creating a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
