It occurs occasionally that your automobile makes noises from your brakes, you are certainly not reassured by this sort of noise and you automatically tend to think that you will have an accident or that the repair will cost you an astronomical amount of money. So, what if you detect noise from the brake on your BMW 4 Series? It most likely is not some thing severe and you may be able to fix it on your own, but when in doubt, as with such issue your safety and the one from other is in question, it is better to verify before a more serious failure happens. It is with this in mind that we have decided to compose this content and give you the chance to find the issue and find a solution. We will go through different steps, review all plausible origins of brake noise on BMW 4 Series, and deliver you the explanations for them in order to support you resolve the issue.brake-noise-bmw-4-series

The different kind of brake noise BMW 4 Series and their origins

The objective of the BMW 4 Series brakes is to come slow down and stop your automobile. This element is an essential element of your vehicule’s safety. Hearing a noise from it must therefore be looked into promptly and leaving it lying around is not a good choice.

I perceive a grinding noise on my brake BMW 4 Series

If you perceive a grinding or scrap metal noise coming from the brake of your BMW 4 Series, it is highly possible that it will be caused by brake pads at the end of their life, actually, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out as time passes. Each producer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may differ. Take off the wheels in question and verify the wear indicator on them. If they are out of date, they must be swapped quickly as they will very easily ruin your discs and keep doing this scrap or grinding noise on BMW 4 Series. If after examining this point, you’re still encountering a grinding noise on your BMW 4 Series, have a look at this article to find a solution.

I experience a constant noise that stops when I brake with my BMW 4 Series

If you notice a constant noise from the brakes BMW 4 Series that only stops when you press your brake system, it is quite possible that caliper wear is the cause. In fact, they can jam as time passes, especially if they are not employed enough. In such a case, they will tend to keep on being in the closed situation, so they will always stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To confirm it, try to brake many times frankly to try to unblock them. If this does not work, it will be necessary to reflect on replacing them.

I experience vibration when I brake with my BMW 4 Series

If in your case, you experience a vibration when braking that would have come from the brake your BMW 4 Series, you will have to be concerned about the state of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be replaced at some point. A vibration most often shows of veiled brake disc, you can verify it by removing your wheels. If so, change them or have them replaced by your technician.

I feel a squealing noise when I brake with my BMW 4 Series

Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your BMW 4 Series, producing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).