It happens occasionally that your automobile makes noises from your brakes, you are almost never reassured by this kind of noise and you instantly tend to think that you will have an accident or that the fix will cost you an substantial amount of money. So, what if you discern noise from the brake on your Audi Q2? It most likely is not some thing severe and you may be able to solve it on your own, but when in uncertainty, as with such problem your security and the one from other is in question, it is better to verify before a more serious failure happens. It’s with idea in mind that we have decided to compose this document and give you the chance to locate the problem and find a solution. We will go through several steps, review all possible sources of brake noise on Audi Q2, and deliver you the explanations for them in order to assist you resolve the problem.
The several types of brake noise Audi Q2 and their origins
The function of the Audi Q2 brakes is to come slow down and stop your automobile. This component is an essential part of your vehicule’s safety. Hearing a sound from it must therefore be investigated right away and leaving it lying around is not a good solution.
I perceive a grinding noise on my brake Audi Q2
If you listen to a grinding or scrap metal noise coming from the brake of your Audi Q2, it is highly conceivable that it will be related to brake pads at the end of their life, actually, the function of the pads is to act as a buffer during braking and they will therefore logically wear out as time passes. Each manufacturer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may vary. Take out the wheels in question and verify the wear indicator on them. If they are out of date, they must be swapped quickly as they will quickly damage your discs and keep doing this scrap or grinding noise on Audi Q2. If after checking this point, you’re still enduring a grinding noise on your Audi Q2, have a look at this article to find a solution.
I feel a regular noise that stops when I brake with my Audi Q2
If you experience a constant noise from the brakes Audi Q2 that only ceases when you press your brake system, it is quite possible that caliper wear is the cause. Indeed, they can jam as time passes, especially if they are not employed enough. When this happens, they will tend to remain in the closed situation, so they will always stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To confirm it, try to brake many times frankly to try to unblock them. If this does not work, it will be necessary to think about changing them.
I feel vibration when I brake with my Audi Q2
If in your case, you feel a vibration when braking that would have come from the brake your Audi Q2, you will have to be concerned about the condition of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be replaced at some point. A vibration most often informs of veiled brake disc, you can verify it by removing your wheels. If so, change them or have them replaced by your mechanic.
I feel a squealing noise when I brake with my Audi Q2
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Audi Q2, producing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
