It appears in some cases that your automobile makes noises from your brakes, you are pretty much never reassured by this sort of noise and you instantly tend to think that you will have an incident or that the fix will cost you an astronomical sum. So, what if you discern noise from the brake on your Audi E-Tron? It is probably not some thing severe and you might have the ability to repair it yourself, but when in doubt, as with such problem your security and the one from other is in question, it is better to check before a more serious failure happens. It is with this in mind that we have chosen to write this article and give you the opportunity to find the problem and find a solution. We will go through different steps, review all plausible sources of brake noise on Audi E-Tron, and offer you the reasons for them in order to support you resolve the problem.
The different types of brake noise Audi E-Tron and their causes
The function of the Audi E-Tron brakes is to come slow down and stop your car. This component is an important component of your vehicle’s safety. Experiencing a noise from it must therefore be examined immediately and leaving it lying around is not a good choice.
I experience a grinding noise on my brake Audi E-Tron
If you perceive a grinding or scrap metal noise coming from the brake of your Audi E-Tron, it is highly imaginable that it will be related to brake pads at the end of their life, actually, the role of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but based on your driving style and route, this may differ. Take off the wheels in question and check the wear indicator on them. If they are dead, they must be changed quickly as they will promptly damage your discs and keep doing this scrap or grinding noise on Audi E-Tron. If after verifying this point, you’re still having a grinding noise on your Audi E-Tron, have a look at this article to find a solution.
I experience a regular noise that stops when I brake with my Audi E-Tron
If you experience a regular noise from the brakes Audi E-Tron that only ceases when you press your brake system, it is quite plausible that caliper wear is the cause. In fact, they can jam over time, especially if they are not used enough. In this case, they will tend to stay on in the closed situation, so they will always stick the pads against the discs, which will lead to an rise in consumption and premature deterioration of your pads. To verify it, try to brake many times frankly to try to unblock them. If this does not function, it will be necessary to think about swapping them.
I experience vibration when I brake with my Audi E-Tron
If in your case, you experience a vibration when braking that would have come from the brake your Audi E-Tron, you will have to feel concerned about the state of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be substituted at some point. A vibration most often notifies of veiled brake disc, you can check it by removing your wheels. If so, swap them or have them replaced by your technician.
I notice a squealing noise when I brake with my Audi E-Tron
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Audi E-Tron, causing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
