It happens occasionally that your automobile makes noises in the brake calipers, you are pretty much never reassured by this types of noise and you immediately tend to think that you will have an incident or that the fix will cost you an substantial amount of money. So, what if you identify noise from the brake calipers on your Volkswagen Rabbit? It may not be anything severe and you may be able to repair it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to verify before a more serious failure happens. It is with this in mind that we have chosen to compose this article and give you the chance to find the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Volkswagen Rabbit, and give you the causes for them in order to help you resolve the problem.
The different types of brake caliper noise on Volkswagen Rabbit and their causes
The objective of the Volkswagen Rabbit brake calipers is to come pinch the brake discs of your Volkswagen Rabbit thanks to the pads they will activate. This component is an important element of your vehicle’s safety. Hearing a sound from it must therefore be investigated immediately and leaving it lying around is not a good solution.
I hear a grinding noise on my brake calipers on Volkswagen Rabbit
If you perceive a grinding or scrap metal noise coming from the brake calipers of your Volkswagen Rabbit, it is highly imaginable that it will be connected to brake pads at the end of their life, indeed, the role of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each producer gives an average runtime in kilometres for pads, but based on your driving style and route, this may change. Remove the wheels in question and check the wear indicator on them. If they are expired, they must be replaced quickly as they will quickly ruin your discs and keep doing this scrap or grinding noise on Volkswagen Rabbit. If after verifying this point, you’re still having a grinding noise on your Volkswagen Rabbit, have a look at this article to find a solution.
I experience a frequent noise that stops when I brake from my Volkswagen Rabbit brake calipers
If you are the victim of a regular noise in the brake calipers of your Volkswagen Rabbit that only stops when you press your brake system, it is quite possible that caliper wear is the reason. In fact, they can jam with time, specifically if they are not employed enough. When this happens, they will tend to keep on being in the closed position, so they will always stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Volkswagen Rabbit
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Volkswagen Rabbit, you will have to be concerned about the condition of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be swapped at some point. A vibration most often informs of veiled brake disc, you can check it by removing your wheels. If so, swap them or have them replaced by your auto mechanic.
When I brake, I experience a squealing in my brake calipers of my Volkswagen Rabbit
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Volkswagen Rabbit, causing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
