It appears occasionally that your automobile makes noises in the brake calipers, you are pretty much never reassured by this kind of noise and you instantly tend to think that you will have an accident or that the fix will cost you an astronomical amount. So, what if you identify noise from the brake calipers on your Volkswagen Crafter 2? It might not be some thing major and you may be able to fix it yourself, but when in doubt, since your safety and the one of others is in question, it is better to verify before a more serious failure occurs. It is with this in mind that we have made the decision to write this document and give you the chance to find out the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Volkswagen Crafter 2, and give you the causes for them in order to help you fix the issue.
The different types of brake caliper noise on Volkswagen Crafter 2 and their causes
The function of the Volkswagen Crafter 2 brake calipers is to come pinch the brake discs of your Volkswagen Crafter 2 thanks to the pads they will activate. This component is an important element of your vehicle’s safety. Experiencing a sound from it must therefore be investigated quickly and leaving it lying around is not a good choice.
I hear a grinding noise on my brake calipers on Volkswagen Crafter 2
If you find out a grinding or scrap metal noise coming from the brake calipers of your Volkswagen Crafter 2, it is highly imaginable that it will be linked to brake pads at the end of their life, in fact, the function of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may change. Remove the wheels in question and check the wear indicator on them. If they are expired, they must be swapped quickly as they will promptly damage your discs and keep doing this scrap or grinding noise on Volkswagen Crafter 2. If after verifying this point, you’re still having a grinding noise on your Volkswagen Crafter 2, have a look at this article to find a solution.
I encounter a regular noise that stops when I brake from my Volkswagen Crafter 2 brake calipers
If you are the victim of a constant noise in the brake calipers of your Volkswagen Crafter 2 that only stops when you press your brake system, it is quite plausible that caliper wear is the reason. Indeed, they can jam after some time, specifically if they are not employed enough. In such a case, they will tend to stay on in the closed position, so they will always stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Volkswagen Crafter 2
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Volkswagen Crafter 2, you will have to be concerned about the state of your discs. Discs tend to wear over time and although they have a longer life than pads, they must be changed at some point. A vibration most often notifies of veiled brake disc, you can check it by disassembling your wheels. If so, replace them or have them replaced by your mechanic.
When I brake, I encounter a squealing in my brake calipers of my Volkswagen Crafter 2
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Volkswagen Crafter 2, causing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
