It appears sometimes that your car makes noises in the brake calipers, you are almost never reassured by this sorts of noise and you immediately tend to think that you will have an accident or that the repair will cost you an astronomical amount of money. So, what if you find noise from the brake calipers on your Peugeot 306? It might not be anything severe and you may be able to fix it yourself, but when in doubt, since your safety and the one of others is in question, it is better to examine before a more serious failure occurs. It is with this in mind that we have chosen to create this document and give you the opportunity to locate the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Peugeot 306, and give you the causes for them in order to help you fix the trouble.
The different types of brake caliper noise on Peugeot 306 and their causes
The function of the Peugeot 306 brake calipers is to come pinch the brake discs of your Peugeot 306 thanks to the pads they will activate. This component is an important element of your vehicle’s safety. Experiencing a sound from it must therefore be looked into promptly and leaving it lying around is not a good choice.
I hear a grinding noise on my brake calipers on Peugeot 306
If you notice a grinding or scrap metal noise coming from the brake calipers of your Peugeot 306, it is highly conceivable that it will be caused by brake pads at the end of their life, actually, the purpose of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but according to your driving style and route, this may fluctuate. Remove the wheels in question and check the wear indicator on them. If they are out of date, they must be replaced quickly as they will promptly affect your discs and keep doing this scrap or grinding noise on Peugeot 306. If after verifying this point, you’re still going through a grinding noise on your Peugeot 306, have a look at this article to find a solution.
I experience a regular noise that stops when I brake from my Peugeot 306 brake calipers
If you are the victim of a continuous noise in the brake calipers of your Peugeot 306 that only stops when you press your brake system, it is quite plausible that caliper wear is the cause. In fact, they can jam as time passes, especially if they are not employed enough. In such a case, they will tend to stay in the closed position, so they will always stick the pads against the discs, which will lead to an rise in consumption and premature deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Peugeot 306
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Peugeot 306, you will have to worry about the condition of your discs. Discs tend to wear over time and although they have a much longer life than pads, they must be substituted at some point. A vibration most often shows of veiled brake disc, you can check it by disassembling your wheels. If so, swap them or have them replaced by your technician.
When I brake, I experience a squealing in my brake calipers of my Peugeot 306
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Peugeot 306, causing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
