It occurs occasionally that your car makes noises in the brake calipers, you are certainly not reassured by this sort of noise and you immediately tend to think that you will have an incident or that the fix will cost you an substantial sum. So, what if you detect noise from the brake calipers on your Mitsubishi Pajero? It may not be some thing serious and you may be able to fix it yourself, but when in doubt, since your safety and the one of others is in question, it is better to check before a more serious failure occurs. It is with this in mind that we have made the decision to write this content and give you the chance to locate the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Mitsubishi Pajero, and give you the reasons for them in order to help you resolve the trouble.
The different types of brake caliper noise on Mitsubishi Pajero and their causes
The function of the Mitsubishi Pajero brake calipers is to come pinch the brake discs of your Mitsubishi Pajero thanks to the pads they will activate. This element is an essential element of your vehicle’s safety. Finding out a noise from it must therefore be examined promptly and leaving it lying around is not a good answer.
I hear a grinding noise on my brake calipers on Mitsubishi Pajero
If you perceive a grinding or scrap metal noise coming from the brake calipers of your Mitsubishi Pajero, it is highly imaginable that it will be related to brake pads at the end of their existence, indeed, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each producer gives an average runtime in kilometres for pads, but according to your driving style and route, this may fluctuate. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be swapped quickly as they will quickly damage your discs and keep doing this scrap or grinding noise on Mitsubishi Pajero. If after looking at this point, you’re still encountering a grinding noise on your Mitsubishi Pajero, have a look at this article to find a solution.
I feel a continuous noise that stops when I brake from my Mitsubishi Pajero brake calipers
If you are the victim of a continuous noise in the brake calipers of your Mitsubishi Pajero that only stops when you press your brake system, it is quite possible that caliper wear is the cause. Indeed, they can jam with time, especially if they are not employed enough. In this case, they will tend to remain in the closed situation, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Mitsubishi Pajero
If in your case, you feel a vibration when braking that would have come from the brake calipers of your Mitsubishi Pajero, you will have to be concerned about the state of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be swapped at some point. A vibration most often shows of veiled brake disc, you can check it by removing your wheels. If so, replace them or have them replaced by your technician.
When I brake, I feel a squealing in my brake calipers of my Mitsubishi Pajero
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Mitsubishi Pajero, producing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
