It appears in some cases that your car makes noises in the brake calipers, you are almost never reassured by this sort of noise and you immediately tend to think that you will have an accident or that the repair will cost you an substantial sum. So, what if you detect noise from the brake calipers on your Mitsubishi Mirage? It might not be some thing serious and you may be able to solve it yourself, but when in doubt, since your safety and the one of others is in question, it is better to examine before a more serious failure happens. It is with this in mind that we have chosen to write this document and give you the chance to find out the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Mitsubishi Mirage, and give you the causes for them in order to help you resolve the issue.
The different types of brake caliper noise on Mitsubishi Mirage and their causes
The objective of the Mitsubishi Mirage brake calipers is to come pinch the brake discs of your Mitsubishi Mirage thanks to the pads they will activate. This element is an important element of your vehicle’s safety. Finding out a sound from it must therefore be examined immediately and leaving it lying around is not a good choice.
I hear a grinding noise on my brake calipers on Mitsubishi Mirage
If you hear a grinding or scrap metal noise coming from the brake calipers of your Mitsubishi Mirage, it is highly conceivable that it will be related to brake pads at the end of their existence, actually, the role of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each producer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may fluctuate. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be replaced quickly as they will quickly ruin your discs and keep doing this scrap or grinding noise on Mitsubishi Mirage. If after looking at this point, you’re still going through a grinding noise on your Mitsubishi Mirage, have a look at this article to find a solution.
I experience a frequent noise that stops when I brake from my Mitsubishi Mirage brake calipers
If you are the victim of a uninterrupted noise in the brake calipers of your Mitsubishi Mirage that only stops when you press your brake system, it is quite conceivable that caliper wear is the reason. In fact, they can jam after some time, especially if they are not used enough. When this happens, they will tend to stay on in the closed position, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and premature deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Mitsubishi Mirage
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Mitsubishi Mirage, you will have to be concerned about the condition of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be substituted at some point. A vibration most often informs of veiled brake disc, you can check it by removing your wheels. If so, swap them or have them replaced by your mechanic.
When I brake, I experience a squealing in my brake calipers of my Mitsubishi Mirage
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Mitsubishi Mirage, creating a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
