It appears in some cases that your car makes noises in the brake calipers, you are rarely reassured by this types of noise and you instantly tend to think that you will have an incident or that the repair will cost you an astronomical sum. So, what if you discover noise from the brake calipers on your Mitsubishi Lancer? It most likely is not some thing major and you may be able to repair it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to verify before a more serious failure occurs. It is with this in mind that we have chosen to create this content and give you the chance to find the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Mitsubishi Lancer, and give you the explanations for them in order to help you fix the issue.
The different types of brake caliper noise on Mitsubishi Lancer and their causes
The function of the Mitsubishi Lancer brake calipers is to come pinch the brake discs of your Mitsubishi Lancer thanks to the pads they will activate. This element is an essential element of your vehicle’s safety. Experiencing a noise from it must therefore be investigated right away and leaving it lying around is not a good answer.
I hear a grinding noise on my brake calipers on Mitsubishi Lancer
If you notice a grinding or scrap metal noise coming from the brake calipers of your Mitsubishi Lancer, it is highly conceivable that it will be linked to brake pads at the end of their life, in fact, the role of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each producer gives an average runtime in kilometres for pads, but according to your driving style and route, this may change. Remove the wheels in question and check the wear indicator on them. If they are out of date, they must be swapped quickly as they will quickly damage your discs and keep doing this scrap or grinding noise on Mitsubishi Lancer. If after verifying this point, you’re still encountering a grinding noise on your Mitsubishi Lancer, have a look at this article to find a solution.
I feel a regular noise that stops when I brake from my Mitsubishi Lancer brake calipers
If you are the victim of a uninterrupted noise in the brake calipers of your Mitsubishi Lancer that only stops when you press your brake system, it is quite plausible that caliper wear is the cause. In fact, they can jam as time passes, especially if they are not employed enough. In such a case, they will tend to stay in the closed position, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and precipitate deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Mitsubishi Lancer
If in your case, you feel a vibration when braking that would have come from the brake calipers of your Mitsubishi Lancer, you will have to worry about the state of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be swapped at some point. A vibration most often shows of veiled brake disc, you can check it by removing your wheels. If so, replace them or have them replaced by your auto mechanic.
When I brake, I feel a squealing in my brake calipers of my Mitsubishi Lancer
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Mitsubishi Lancer, causing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
