It appears sometimes that your automobile makes noises in the brake calipers, you are certainly not reassured by this sort of noise and you immediately tend to think that you will have an incident or that the repair will cost you an astronomical amount of money. So, what if you find noise from the brake calipers on your Mazda Mx5? It is probably not some thing serious and you may be able to repair it yourself, but when in doubt, since your safety and the one of others is in question, it is better to check before a more serious failure occurs. It is with this in mind that we have chosen to compose this document and give you the opportunity to find out the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Mazda Mx5, and give you the explanations for them in order to help you solve the trouble.brake-caliper-noisemazda-mx5

The different types of brake caliper noise on Mazda Mx5 and their causes

The objective of the Mazda Mx5 brake calipers is to come pinch the brake discs of your Mazda Mx5 thanks to the pads they will activate. This component is an important element of your vehicle’s safety. Hearing a sound from it must therefore be examined promptly and leaving it lying around is not a good solution.

I hear a grinding noise on my brake calipers on Mazda Mx5

If you notice a grinding or scrap metal noise coming from the brake calipers of your Mazda Mx5, it is highly conceivable that it will be linked to brake pads at the end of their life, indeed, the role of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each producer gives an average runtime in kilometres for pads, but according to your driving style and route, this may change. Remove the wheels in question and check the wear indicator on them. If they are out of date, they must be replaced quickly as they will quickly affect your discs and keep doing this scrap or grinding noise on Mazda Mx5. If after checking this point, you’re still experiencing a grinding noise on your Mazda Mx5, have a look at this article to find a solution.

I feel a frequent noise that stops when I brake from my Mazda Mx5 brake calipers

If you are the victim of a uninterrupted noise in the brake calipers of your Mazda Mx5 that only stops when you press your brake system, it is quite possible that caliper wear is the reason. In fact, they can jam as time passes, especially if they are not used enough. In such a case, they will tend to stay on in the closed situation, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and premature deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.

When I brake, my brake pedal vibrates on my Mazda Mx5

If in your case, you feel a vibration when braking that would have come from the brake calipers of your Mazda Mx5, you will have to feel concerned about the condition of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be swapped at some point. A vibration most often notifies of veiled brake disc, you can check it by removing your wheels. If so, replace them or have them replaced by your technician.

When I brake, I feel a squealing in my brake calipers of my Mazda Mx5

Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Mazda Mx5, producing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).