It appears sometimes that your car makes noises in the brake calipers, you are certainly not reassured by this sorts of noise and you immediately tend to think that you will have an incident or that the repair will cost you an astronomical sum. So, what if you find noise from the brake calipers on your Jeep Liberty? It might not be anything severe and you may be able to repair it yourself, but when in doubt, since your safety and the one of others is in question, it is better to check before a more serious failure occurs. It is with this in mind that we have made the decision to write this article and give you the chance to locate the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Jeep Liberty, and give you the explanations for them in order to help you fix the issue.
The different types of brake caliper noise on Jeep Liberty and their causes
The objective of the Jeep Liberty brake calipers is to come pinch the brake discs of your Jeep Liberty thanks to the pads they will activate. This component is an fundamental element of your vehicle’s safety. Experiencing a sound from it must therefore be investigated quickly and leaving it lying around is not a good answer.
I hear a grinding noise on my brake calipers on Jeep Liberty
If you perceive a grinding or scrap metal noise coming from the brake calipers of your Jeep Liberty, it is highly imaginable that it will be linked to brake pads at the end of their existence, actually, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each producer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be swapped quickly as they will very easily ruin your discs and keep doing this scrap or grinding noise on Jeep Liberty. If after looking at this point, you’re still enduring a grinding noise on your Jeep Liberty, have a look at this article to find a solution.
I encounter a continuing noise that stops when I brake from my Jeep Liberty brake calipers
If you are the victim of a continuous noise in the brake calipers of your Jeep Liberty that only stops when you press your brake system, it is quite plausible that caliper wear is the cause. In fact, they can jam with time, specifically if they are not used enough. In such a case, they will tend to keep on being in the closed situation, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and precipitate deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Jeep Liberty
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Jeep Liberty, you will have to worry about the condition of your discs. Discs tend to wear over time and although they have a much longer life than pads, they must be replaced at some point. A vibration most often informs of veiled brake disc, you can check it by removing your wheels. If so, swap them or have them replaced by your mechanic.
When I brake, I encounter a squealing in my brake calipers of my Jeep Liberty
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Jeep Liberty, causing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
