It happens in some cases that your car makes noises in the brake calipers, you are almost never reassured by this types of noise and you automatically tend to think that you will have an accident or that the fix will cost you an astronomical amount. So, what if you identify noise from the brake calipers on your Jeep Grand Cherokee? It most likely is not some thing severe and you may be able to fix it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to check before a more serious failure happens. It is with this in mind that we have decided to compose this article and give you the chance to find out the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Jeep Grand Cherokee, and give you the reasons for them in order to help you fix the problem.
The different types of brake caliper noise on Jeep Grand Cherokee and their causes
The objective of the Jeep Grand Cherokee brake calipers is to come pinch the brake discs of your Jeep Grand Cherokee thanks to the pads they will activate. This component is an fundamental element of your vehicle’s safety. Hearing a sound from it must therefore be looked into right away and leaving it lying around is not a good answer.
I hear a grinding noise on my brake calipers on Jeep Grand Cherokee
If you notice a grinding or scrap metal noise coming from the brake calipers of your Jeep Grand Cherokee, it is highly possible that it will be related to brake pads at the end of their existence, indeed, the role of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each producer gives an average runtime in kilometres for pads, but based on your driving style and route, this may differ. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be swapped quickly as they will quickly affect your discs and keep doing this scrap or grinding noise on Jeep Grand Cherokee. If after examining this point, you’re still enduring a grinding noise on your Jeep Grand Cherokee, have a look at this article to find a solution.
I feel a uninterrupted noise that stops when I brake from my Jeep Grand Cherokee brake calipers
If you are the victim of a continuous noise in the brake calipers of your Jeep Grand Cherokee that only stops when you press your brake system, it is quite possible that caliper wear is the cause. Indeed, they can jam over time, specifically if they are not used enough. When this happens, they will tend to stay in the closed position, so they will always stick the pads against the discs, which will lead to an rise in consumption and premature deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Jeep Grand Cherokee
If in your case, you feel a vibration when braking that would have come from the brake calipers of your Jeep Grand Cherokee, you will have to be concerned about the condition of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be replaced at some point. A vibration most often informs of veiled brake disc, you can check it by removing your wheels. If so, swap them or have them replaced by your auto technician.
When I brake, I feel a squealing in my brake calipers of my Jeep Grand Cherokee
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Jeep Grand Cherokee, producing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
