It occurs in some cases that your car makes noises in the brake calipers, you are almost never reassured by this kind of noise and you instantly tend to think that you will have an incident or that the repair will cost you an astronomical sum. So, what if you find noise from the brake calipers on your Ford S-max 2? It most likely is not anything major and you may be able to solve it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to check before a more serious failure happens. It is with this in mind that we have made the decision to write this content and give you the chance to locate the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Ford S-max 2, and give you the causes for them in order to help you solve the trouble.
The different types of brake caliper noise on Ford S-max 2 and their causes
The function of the Ford S-max 2 brake calipers is to come pinch the brake discs of your Ford S-max 2 thanks to the pads they will activate. This component is an important element of your vehicle’s safety. Experiencing a noise from it must therefore be looked into quickly and leaving it lying around is not a good alternative.
I hear a grinding noise on my brake calipers on Ford S-max 2
If you find out a grinding or scrap metal noise coming from the brake calipers of your Ford S-max 2, it is highly possible that it will be linked to brake pads at the end of their life, indeed, the role of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each company gives an average runtime in kilometres for pads, but based on your driving style and route, this may change. Remove the wheels in question and check the wear indicator on them. If they are expired, they must be changed quickly as they will quickly ruin your discs and keep doing this scrap or grinding noise on Ford S-max 2. If after examining this point, you’re still encountering a grinding noise on your Ford S-max 2, have a look at this article to find a solution.
I feel a regular noise that stops when I brake from my Ford S-max 2 brake calipers
If you are the victim of a continual noise in the brake calipers of your Ford S-max 2 that only stops when you press your brake system, it is quite conceivable that caliper wear is the reason. In fact, they can jam as time passes, specifically if they are not employed enough. In such a case, they will tend to remain in the closed position, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Ford S-max 2
If in your case, you feel a vibration when braking that would have come from the brake calipers of your Ford S-max 2, you will have to get worried about the condition of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be replaced at some point. A vibration most often notifies of veiled brake disc, you can check it by disassembling your wheels. If so, replace them or have them replaced by your auto technician.
When I brake, I feel a squealing in my brake calipers of my Ford S-max 2
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Ford S-max 2, causing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
