It happens sometimes that your car makes noises in the brake calipers, you are almost never reassured by this sort of noise and you immediately tend to think that you will have an accident or that the fix will cost you an substantial amount. So, what if you detect noise from the brake calipers on your Ford Fusion? It might not be anything major and you may be able to repair it yourself, but when in doubt, since your safety and the one of others is in question, it is better to check before a more serious failure occurs. It is with this in mind that we have chosen to write this article and give you the chance to locate the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Ford Fusion, and give you the explanations for them in order to help you fix the issue.
The different types of brake caliper noise on Ford Fusion and their causes
The function of the Ford Fusion brake calipers is to come pinch the brake discs of your Ford Fusion thanks to the pads they will activate. This element is an essential element of your vehicle’s safety. Discovering a noise from it must therefore be analyzed right away and leaving it lying around is not a good choice.
I hear a grinding noise on my brake calipers on Ford Fusion
If you perceive a grinding or scrap metal noise coming from the brake calipers of your Ford Fusion, it is highly imaginable that it will be related to brake pads at the end of their existence, in fact, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each producer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be swapped quickly as they will very easily affect your discs and keep doing this scrap or grinding noise on Ford Fusion. If after looking at this point, you’re still enduring a grinding noise on your Ford Fusion, have a look at this article to find a solution.
I encounter a constant noise that stops when I brake from my Ford Fusion brake calipers
If you are the victim of a continual noise in the brake calipers of your Ford Fusion that only stops when you press your brake system, it is quite plausible that caliper wear is the cause. Indeed, they can jam over time, specifically if they are not employed enough. In this case, they will tend to remain in the closed position, so they will always stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Ford Fusion
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Ford Fusion, you will have to be concerned about the condition of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be replaced at some point. A vibration most often notifies of veiled brake disc, you can check it by disassembling your wheels. If so, swap them or have them replaced by your technician.
When I brake, I encounter a squealing in my brake calipers of my Ford Fusion
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Ford Fusion, causing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
