It occurs occasionally that your car makes noises in the brake calipers, you are almost never reassured by this kind of noise and you immediately tend to think that you will have an accident or that the fix will cost you an substantial sum. So, what if you identify noise from the brake calipers on your Ford Explorer? It is probably not some thing major and you may be able to repair it yourself, but when in doubt, since your safety and the one of others is in question, it is better to verify before a more serious failure occurs. It is with this in mind that we have decided to create this content and give you the opportunity to find the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Ford Explorer, and give you the reasons for them in order to help you solve the problem.
The different types of brake caliper noise on Ford Explorer and their causes
The objective of the Ford Explorer brake calipers is to come pinch the brake discs of your Ford Explorer thanks to the pads they will activate. This component is an fundamental element of your vehicle’s safety. Discovering a noise from it must therefore be looked into quickly and leaving it lying around is not a good answer.
I hear a grinding noise on my brake calipers on Ford Explorer
If you listen to a grinding or scrap metal noise coming from the brake calipers of your Ford Explorer, it is highly imaginable that it will be caused by brake pads at the end of their life, in fact, the purpose of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but based on your driving style and route, this may fluctuate. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be changed quickly as they will very easily ruin your discs and keep doing this scrap or grinding noise on Ford Explorer. If after checking this point, you’re still having a grinding noise on your Ford Explorer, have a look at this article to find a solution.
I experience a continuous noise that stops when I brake from my Ford Explorer brake calipers
If you are the victim of a continuous noise in the brake calipers of your Ford Explorer that only stops when you press your brake system, it is quite possible that caliper wear is the cause. In fact, they can jam over time, especially if they are not employed enough. In this case, they will tend to stay in the closed situation, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and premature deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Ford Explorer
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Ford Explorer, you will have to worry about the state of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be substituted at some point. A vibration most often shows of veiled brake disc, you can check it by disassembling your wheels. If so, replace them or have them replaced by your mechanic.
When I brake, I experience a squealing in my brake calipers of my Ford Explorer
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Ford Explorer, causing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
