It happens occasionally that your car makes noises in the brake calipers, you are almost never reassured by this sorts of noise and you automatically tend to think that you will have an incident or that the repair will cost you an astronomical sum. So, what if you identify noise from the brake calipers on your Ford B-max? It most likely is not anything serious and you may be able to solve it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to verify before a more serious failure happens. It is with this in mind that we have decided to write this document and give you the opportunity to find out the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Ford B-max, and give you the causes for them in order to help you fix the issue.
The different types of brake caliper noise on Ford B-max and their causes
The objective of the Ford B-max brake calipers is to come pinch the brake discs of your Ford B-max thanks to the pads they will activate. This element is an important element of your vehicle’s safety. Discovering a sound from it must therefore be looked into immediately and leaving it lying around is not a good choice.
I hear a grinding noise on my brake calipers on Ford B-max
If you perceive a grinding or scrap metal noise coming from the brake calipers of your Ford B-max, it is highly imaginable that it will be caused by brake pads at the end of their life, indeed, the role of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each producer gives an average runtime in kilometres for pads, but based on your driving style and route, this may fluctuate. Remove the wheels in question and check the wear indicator on them. If they are out of date, they must be replaced quickly as they will promptly damage your discs and keep doing this scrap or grinding noise on Ford B-max. If after looking at this point, you’re still enduring a grinding noise on your Ford B-max, have a look at this article to find a solution.
I experience a uninterrupted noise that stops when I brake from my Ford B-max brake calipers
If you are the victim of a continuous noise in the brake calipers of your Ford B-max that only stops when you press your brake system, it is quite conceivable that caliper wear is the reason. In fact, they can jam with time, especially if they are not employed enough. In this case, they will tend to remain in the closed situation, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and precipitate deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Ford B-max
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Ford B-max, you will have to feel concerned about the state of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be substituted at some point. A vibration most often notifies of veiled brake disc, you can check it by removing your wheels. If so, change them or have them replaced by your auto mechanic.
When I brake, I experience a squealing in my brake calipers of my Ford B-max
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Ford B-max, causing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
