It appears occasionally that your car makes noises in the brake calipers, you are pretty much never reassured by this sorts of noise and you immediately tend to think that you will have an accident or that the fix will cost you an substantial sum. So, what if you identify noise from the brake calipers on your Fiat Panda 2? It is probably not some thing serious and you may be able to repair it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to verify before a more serious failure occurs. It is with this in mind that we have decided to write this document and give you the opportunity to locate the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Fiat Panda 2, and give you the causes for them in order to help you resolve the issue.
The different types of brake caliper noise on Fiat Panda 2 and their causes
The objective of the Fiat Panda 2 brake calipers is to come pinch the brake discs of your Fiat Panda 2 thanks to the pads they will activate. This component is an fundamental element of your vehicle’s safety. Finding out a noise from it must therefore be investigated promptly and leaving it lying around is not a good choice.
I hear a grinding noise on my brake calipers on Fiat Panda 2
If you perceive a grinding or scrap metal noise coming from the brake calipers of your Fiat Panda 2, it is highly imaginable that it will be related to brake pads at the end of their existence, actually, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but based on your driving style and route, this may differ. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be swapped quickly as they will quickly affect your discs and keep doing this scrap or grinding noise on Fiat Panda 2. If after verifying this point, you’re still enduring a grinding noise on your Fiat Panda 2, have a look at this article to find a solution.
I encounter a continuous noise that stops when I brake from my Fiat Panda 2 brake calipers
If you are the victim of a continual noise in the brake calipers of your Fiat Panda 2 that only stops when you press your brake system, it is quite conceivable that caliper wear is the reason. In fact, they can jam as time passes, especially if they are not employed enough. When this happens, they will tend to remain in the closed situation, so they will always stick the pads against the discs, which will lead to an increase in consumption and premature deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Fiat Panda 2
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Fiat Panda 2, you will have to be concerned about the state of your discs. Discs tend to wear over time and although they have a longer life than pads, they must be swapped at some point. A vibration most often notifies of veiled brake disc, you can check it by removing your wheels. If so, change them or have them replaced by your auto technician.
When I brake, I encounter a squealing in my brake calipers of my Fiat Panda 2
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Fiat Panda 2, causing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
