It occurs in some cases that your car makes noises in the brake calipers, you are rarely reassured by this kind of noise and you immediately tend to think that you will have an incident or that the fix will cost you an astronomical amount. So, what if you find noise from the brake calipers on your Fiat Panda? It might not be some thing major and you may be able to fix it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to check before a more serious failure happens. It is with this in mind that we have chosen to write this document and give you the opportunity to find out the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Fiat Panda, and give you the explanations for them in order to help you solve the trouble.
The different types of brake caliper noise on Fiat Panda and their causes
The objective of the Fiat Panda brake calipers is to come pinch the brake discs of your Fiat Panda thanks to the pads they will activate. This component is an important element of your vehicle’s safety. Hearing a noise from it must therefore be examined promptly and leaving it lying around is not a good solution.
I hear a grinding noise on my brake calipers on Fiat Panda
If you hear a grinding or scrap metal noise coming from the brake calipers of your Fiat Panda, it is highly possible that it will be connected to brake pads at the end of their life, indeed, the role of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each producer gives an average runtime in kilometres for pads, but according to your driving style and route, this may change. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be replaced quickly as they will very easily ruin your discs and keep doing this scrap or grinding noise on Fiat Panda. If after looking at this point, you’re still feeling a grinding noise on your Fiat Panda, have a look at this article to find a solution.
I encounter a regular noise that stops when I brake from my Fiat Panda brake calipers
If you are the victim of a uninterrupted noise in the brake calipers of your Fiat Panda that only stops when you press your brake system, it is quite possible that caliper wear is the cause. Indeed, they can jam as time passes, specifically if they are not employed enough. In this case, they will tend to remain in the closed situation, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and premature deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Fiat Panda
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Fiat Panda, you will have to get worried about the condition of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be changed at some point. A vibration most often shows of veiled brake disc, you can check it by removing your wheels. If so, swap them or have them replaced by your mechanic.
When I brake, I encounter a squealing in my brake calipers of my Fiat Panda
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Fiat Panda, causing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
