It happens in some cases that your automobile makes noises in the brake calipers, you are certainly not reassured by this sort of noise and you immediately tend to think that you will have an accident or that the repair will cost you an substantial amount of money. So, what if you discover noise from the brake calipers on your Fiat Fullback? It may not be some thing major and you may be able to repair it yourself, but when in doubt, since your safety and the one of others is in question, it is better to examine before a more serious failure happens. It is with this in mind that we have chosen to compose this article and give you the opportunity to find out the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Fiat Fullback, and give you the causes for them in order to help you fix the problem.
The different types of brake caliper noise on Fiat Fullback and their causes
The objective of the Fiat Fullback brake calipers is to come pinch the brake discs of your Fiat Fullback thanks to the pads they will activate. This component is an important element of your vehicle’s safety. Hearing a sound from it must therefore be examined immediately and leaving it lying around is not a good solution.
I hear a grinding noise on my brake calipers on Fiat Fullback
If you notice a grinding or scrap metal noise coming from the brake calipers of your Fiat Fullback, it is highly conceivable that it will be connected to brake pads at the end of their existence, indeed, the role of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each company gives an average runtime in kilometres for pads, but depending on your driving style and route, this may differ. Remove the wheels in question and check the wear indicator on them. If they are out of date, they must be changed quickly as they will promptly damage your discs and keep doing this scrap or grinding noise on Fiat Fullback. If after checking out this point, you’re still feeling a grinding noise on your Fiat Fullback, have a look at this article to find a solution.
I experience a regular noise that stops when I brake from my Fiat Fullback brake calipers
If you are the victim of a continual noise in the brake calipers of your Fiat Fullback that only stops when you press your brake system, it is quite plausible that caliper wear is the cause. Indeed, they can jam over time, specifically if they are not used enough. In such a case, they will tend to keep on being in the closed situation, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Fiat Fullback
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Fiat Fullback, you will have to worry about the state of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be swapped at some point. A vibration most often notifies of veiled brake disc, you can check it by removing your wheels. If so, swap them or have them replaced by your technician.
When I brake, I experience a squealing in my brake calipers of my Fiat Fullback
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Fiat Fullback, causing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
