It occurs occasionally that your car makes noises in the brake calipers, you are pretty much never reassured by this sorts of noise and you immediately tend to think that you will have an accident or that the repair will cost you an substantial amount. So, what if you detect noise from the brake calipers on your Fiat Bravo? It most likely is not anything major and you may be able to repair it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to verify before a more serious failure happens. It is with this in mind that we have decided to write this content and give you the chance to locate the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Fiat Bravo, and give you the causes for them in order to help you resolve the issue.
The different types of brake caliper noise on Fiat Bravo and their causes
The objective of the Fiat Bravo brake calipers is to come pinch the brake discs of your Fiat Bravo thanks to the pads they will activate. This element is an fundamental element of your vehicle’s safety. Finding out a noise from it must therefore be looked into right away and leaving it lying around is not a good solution.
I hear a grinding noise on my brake calipers on Fiat Bravo
If you perceive a grinding or scrap metal noise coming from the brake calipers of your Fiat Bravo, it is highly conceivable that it will be caused by brake pads at the end of their life, actually, the purpose of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each company gives an average runtime in kilometres for pads, but according to your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be replaced quickly as they will quickly affect your discs and keep doing this scrap or grinding noise on Fiat Bravo. If after examining this point, you’re still feeling a grinding noise on your Fiat Bravo, have a look at this article to find a solution.
I experience a uninterrupted noise that stops when I brake from my Fiat Bravo brake calipers
If you are the victim of a continuous noise in the brake calipers of your Fiat Bravo that only stops when you press your brake system, it is quite possible that caliper wear is the reason. In fact, they can jam with time, especially if they are not used enough. In this case, they will tend to stay on in the closed situation, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and premature deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Fiat Bravo
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Fiat Bravo, you will have to feel concerned about the state of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be changed at some point. A vibration most often notifies of veiled brake disc, you can check it by removing your wheels. If so, swap them or have them replaced by your mechanic.
When I brake, I experience a squealing in my brake calipers of my Fiat Bravo
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Fiat Bravo, causing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
