It happens occasionally that your automobile makes noises in the brake calipers, you are pretty much never reassured by this sorts of noise and you immediately tend to think that you will have an accident or that the fix will cost you an substantial amount of money. So, what if you find noise from the brake calipers on your Dodge Avenger? It might not be some thing major and you may be able to fix it yourself, but when in doubt, since your safety and the one of others is in question, it is better to check before a more serious failure occurs. It is with this in mind that we have decided to create this document and give you the opportunity to find out the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Dodge Avenger, and give you the causes for them in order to help you resolve the issue.
The different types of brake caliper noise on Dodge Avenger and their causes
The function of the Dodge Avenger brake calipers is to come pinch the brake discs of your Dodge Avenger thanks to the pads they will activate. This component is an important element of your vehicle’s safety. Hearing a sound from it must therefore be investigated promptly and leaving it lying around is not a good alternative.
I hear a grinding noise on my brake calipers on Dodge Avenger
If you notice a grinding or scrap metal noise coming from the brake calipers of your Dodge Avenger, it is highly conceivable that it will be related to brake pads at the end of their life, in fact, the role of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each producer gives an average runtime in kilometres for pads, but based on your driving style and route, this may change. Remove the wheels in question and check the wear indicator on them. If they are out of date, they must be changed quickly as they will very easily damage your discs and keep doing this scrap or grinding noise on Dodge Avenger. If after checking this point, you’re still going through a grinding noise on your Dodge Avenger, have a look at this article to find a solution.
I encounter a regular noise that stops when I brake from my Dodge Avenger brake calipers
If you are the victim of a continual noise in the brake calipers of your Dodge Avenger that only stops when you press your brake system, it is quite conceivable that caliper wear is the cause. Indeed, they can jam after some time, especially if they are not used enough. In this case, they will tend to remain in the closed position, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and premature deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Dodge Avenger
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Dodge Avenger, you will have to get worried about the state of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be swapped at some point. A vibration most often shows of veiled brake disc, you can check it by disassembling your wheels. If so, replace them or have them replaced by your auto mechanic.
When I brake, I encounter a squealing in my brake calipers of my Dodge Avenger
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Dodge Avenger, producing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
