It occurs occasionally that your car makes noises in the brake calipers, you are certainly not reassured by this sort of noise and you automatically tend to think that you will have an accident or that the repair will cost you an astronomical sum. So, what if you discover noise from the brake calipers on your Acura TSX? It might not be some thing severe and you may be able to repair it yourself, but when in doubt, since your safety and the one of others is in question, it is better to verify before a more serious failure occurs. It is with this in mind that we have chosen to compose this document and give you the opportunity to locate the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Acura TSX, and give you the explanations for them in order to help you fix the issue.
The different types of brake caliper noise on Acura TSX and their causes
The objective of the Acura TSX brake calipers is to come pinch the brake discs of your Acura TSX thanks to the pads they will activate. This component is an fundamental element of your vehicle’s safety. Discovering a noise from it must therefore be looked into immediately and leaving it lying around is not a good answer.
I hear a grinding noise on my brake calipers on Acura TSX
If you find out a grinding or scrap metal noise coming from the brake calipers of your Acura TSX, it is highly imaginable that it will be related to brake pads at the end of their existence, indeed, the function of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each company gives an average runtime in kilometres for pads, but according to your driving style and route, this may fluctuate. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be swapped quickly as they will promptly damage your discs and keep doing this scrap or grinding noise on Acura TSX. If after checking this point, you’re still experiencing a grinding noise on your Acura TSX, have a look at this article to find a solution.
I encounter a constant noise that stops when I brake from my Acura TSX brake calipers
If you are the victim of a constant noise in the brake calipers of your Acura TSX that only stops when you press your brake system, it is quite possible that caliper wear is the cause. Indeed, they can jam with time, especially if they are not used enough. In such a case, they will tend to stay in the closed position, so they will always stick the pads against the discs, which will lead to an increase in consumption and premature deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Acura TSX
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Acura TSX, you will have to worry about the state of your discs. Discs tend to wear over time and although they have a longer life than pads, they must be changed at some point. A vibration most often notifies of veiled brake disc, you can check it by removing your wheels. If so, change them or have them replaced by your auto mechanic.
When I brake, I encounter a squealing in my brake calipers of my Acura TSX
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Acura TSX, producing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
