On occasion your automobile can produce sounds in the front right, you are very almost never reassured by this kind of noise and you straightaway start to think that you will loose a wheel or that the fix will cost you an astronomical amount. Thus, what if you recognize a noise coming from the front right of your Audi Q2? It may not be much and you can resolve the problem yourself, but if in doubt it is better to examine before a larger failure appears. It is with this in mind that we have chosen to produce this content and allow you to find the problem and find a treatment. We will, through few steps review all the elements that can generate noises at the front right of your Audi Q2. 
What are the components that can generate front right noise Audi Q2?
Most of our article will concentrate on finding the element that gives your Audi Q2 front wheel noise. The following is a list of the elements that are most likely to be generating it and how to verify it.
Grinding noise front right wheel Audi Q2 : the shock absorber cup
One of the most likely causes of symptoms on your Audi Q2 front right wheel noise is advanced wear and tear on your suspension device. In fact, the suspension cups, when they are dead, the rubber (silentblock) that works as a buffer and shock absorber for the upper part of the suspension no longer does its purpose and during small jolts that compress the suspension systems. To examine if this is the problem that worries you, take a dented, slow-speed road and pay attention to the noise coming from your front right as you pass over holes. If these are the cups, consider swapping them promptly as this may damage other components and necessitate more expensive repairs.
Noise while turning front right Audi Q2 : stabilizer bar
If you find out a noise when turning on your front right wheel Audi Q2 at the level of the front right when you are turning flat or climbing on sidewalks for example, it is most likely linked to one of the composents of your stabilizer bar that is defective. To verify the origin of the problem, you may feel a lack of balance in the direction of the car (it pulls to the right or it pulls to the right). Moreover, you can put yourself on the right side of your front wheels and try to shake your wheel powerfully, if you hear a clicking sound it is highly conceivable that your silentblocks of stabilizer bar are dead. In this case, go to your mechanic.
Front right noise when turning Audi Q2 : direction triangles
Finally, you may have a noise in the front right wheel on your Audi Q2, when you increase the speed of, brake or at any other random moment. It is likely that the cause of this problem comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also examine the state of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your mechanic.
Loud knocking or grinding noise front right Audi Q2 : bearings
One of the other possible origins of symptoms of the front right grinding or knocking noise on your Audi Q2, may be that one of your bearging is tired, it will start to make a thumping noise that raises when it is under stress (turns faster and faster). So be sure you examine by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case swap it or them promptly. If, on the other hand, this noise only shows up with an engaged speed, read our article on loud noises on Audi Q2, you will surely find an answer to your problem.
Front right wheel noise squeaking Audi Q2 : cardan shaft
One of the most common causes when noise shows up on the front right of your Audi Q2 when you turn with your car is in connection with the direction of your car. In fact, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Audi Q2, do not hesitate to consult this article to find the solution to your problem.
