It is never pleasurable to acknowledge a sound on your vehicle that you don’t know where it comes from. You may be thinking what to do when you find a reversing gear noise that lasts on your Hyundai Veloster? Any gearbox issue can be important, but before making sure, it is better to do a few investigations. Our team has created this document to help you eliminate it. First, we will see what the origins and the different gearbox noises can be on Hyundai Veloster, and second, what are the solutions available to you.
Classical reverse Hyundai Veloster noises and some tips to maintain your gearbox
Why does the reversing of my Hyundai Veloster make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult process. The sound created by the reversing of your Hyundai Veloster is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears more quiet than with spur gears chosen for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. In fact, the pressure you will exert on the gears will be enormous and you will create a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely common if you hear a reverse noise on your Hyundai Veloster if you shift gear under these conditions.
Diverse Hyundai Veloster reversing noises and their origins
Finally in this section, we will move on to what you are probably most curious about in this page, to find out about the source of reversing noise on Hyundai Veloster. Here are the 3 typical sounds you may be victim of.
I hear a grinding noise when starting in reverse gear
If you acknowledge a grinding noise when you start in reverse with your Hyundai Veloster, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to browse this article for more information about strut mount noises on Hyundai Veloster.
An increased reverse knocking noise on Hyundai VelosterX
If you are subject to a knocking noise when you are in reverse with your Hyundai Veloster and this noise tends to increase as you gain speed. It is conceivable that you are confronting a serious issue that needs to be fixed very fast before ruining your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears very fast. Take your vehicle to your repair shop quickly or browse this content page about gearbox noise on Hyundai Veloster for more information.
I perceive a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and related to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Hyundai Veloster reverse gear makes more noise than before, it is conceivable that filings have been made and are moving around in it. It is therefore time to empty the box.
