On occasion your car can make noises in the front axle, you are very certainly not reassured by this kind of noise and you automatically tend to think that you will lose a wheel or that the repair will cost you an massive amount. Thus, what if you uncover a noise coming from a gimbals of your Hyundai Veloster? It may not be much and you can correct the problem yourself, but if in doubt it is better to examine before a larger troubles shows up. It is with this in mind that we have decided to compose this document and allow you to find out the problem and find a treatment. We will, through different steps review all the elements that can produce noises at the front end of your Hyundai Veloster. 
What are the elements that can cause a noise close to gimbals on Hyundai Veloster?
Most of our job will focus on finding the element that gives your Hyundai Veloster gimbals noise. The following is a list of the components that are most likely to be making it and how to confirm it.
Noise vibration that sounds like gimbals on Hyundai Veloster : the shock absorber cup
One of the most common reason of noises on Hyundai Veloster that sounds like a gimbals is advanced wear and tear on your suspension system. In fact, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer fulfils its role and during small jolts that compress the suspensions. To examine if this is the problem that concerns you, take a dented, slow-speed road and pay attention to the noise coming from your front end as you pass over holes. If these are the cups, think about replacing them quickly as this may affect other parts and require more costly repairs.
Noise while turning that sounds like gimbals Hyundai Veloster : stabilizer bar
If you know of a noise on your Hyundai Veloster that sounds like a gimbals when you are turning flat or going up on sidewalks for example, it is most likely connected to one of the parts of your stabilizer bar that is faulty. To confirm the origin of the problem, you may feel a lack of balance in the direction of the car (it pulls to the left or it pulls to the right). Furthermore, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels strongly, if you hear a clicking sound it is highly conceivable that your silentblocks of stabilizer bar are dead. In this case, go to your garage.
Noise when turning Hyundai Veloster : gimbals
One of the most traditional causes when noise appearsand sounds like gimbals on your Hyundai Veloster when you turn with your car is in connection with the direction of your car. Indeed, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can generate “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your Hyundai Veloster, do not hesitate to consult this article to find the solution to your problem.
