It is never enjoyable to notice a sound on your automobile that you don’t know where it comes from. You may be wanting to know what to do when you notice a reversing gear noise that persists on your Honda HR V? Any gearbox problem can be critical, but before making sure, it is better to do a few checks. Our team has written this document to help you resolve it. First, we will see what the origins and the different gearbox noises can be on Honda HR V, and second, what are the solutions available to you.
Classical reverse Honda HR V noises and some tips to look after your gearbox
Why does the reversing of my Honda HR V make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult action. The sound induced by the reversing of your Honda HR V is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears more quiet than with spur gears implemented for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Indeed, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. In fact, the pressure you will put in on the gears will be enormous and you will generate a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely typical if you find out a reverse noise on your Honda HR V if you shift gear under these conditions.
Diverse Honda HR V reversing noises and their origins
Finally in this section, we will move on to what you are probably most interested in this content, to find out about the source of reversing noise on Honda HR V. Here are the 3 typical sounds you may be victim of.
I acknowledge a grinding noise when starting in reverse gear
If you notice a grinding noise when you start in reverse with your Honda HR V, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to read this paper for more information about strut mount noises on Honda HR V.
An increased reverse knocking noise on Honda HR VX
If you are subject to a knocking noise when you are in reverse with your Honda HR V and this noise tends to amplify as you gain speed. It is possible that you are going through a serious problem that needs to be solved quickly before ruining your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears in short order. Take your automobile to your repair shop quickly or browse this content page about gearbox noise on Honda HR V for more information.
I hear a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Honda HR V reverse gear makes more noise than before, it is possible that filings have been produced and are moving around in it. It is therefore time to empty the box.
