It is never pleasurable to notice a sound on your vehicle that you don’t know where it comes from. You may be thinking about what to do when you find a reversing gear noise that persists on your Jeep Renegade? Any gearbox trouble can be severe, but before making sure, it is better to do a few checks. Our team has created this paper to help you solve it. First, we will see what the origins and the different gearbox noises can be on Jeep Renegade, and second, what are the solutions available to you.
Classical reverse Jeep Renegade noises and some tips to look after your gearbox
Why does the reversing of my Jeep Renegade make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult task. The noise created by the reversing of your Jeep Renegade is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears much less important than with spur gears implemented for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. In fact, the pressure you will exert on the gears will be enormous and you will develop a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely normal if you perceive a reverse noise on your Jeep Renegade if you shift gear under these conditions.
Several Jeep Renegade reversing noises and their triggers
Finally in this section, we will move on to what you are probably most curious about in this page, to learn about the cause of reversing noise on Jeep Renegade. Here are the 3 typical noises you may be victim of.
I find out a grinding noise when starting in reverse gear
If you notice a grinding noise when you start in reverse with your Jeep Renegade, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to consult this paper for more information about strut mount noises on Jeep Renegade.
An increased reverse knocking noise on Jeep RenegadeX
If you are subject to a knocking noise when you are in reverse with your Jeep Renegade and this noise tends to amplify as you gain speed. It is conceivable that you are going through a serious trouble that needs to be solved as soon as possible before ruining your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears quickly. Take your vehicle to your repair shop quickly or read this content page about gearbox noise on Jeep Renegade for more data.
I listen to a noise when I go in reverse
Listening a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Jeep Renegade reverse gear makes more noise than before, it is conceivable that filings have been created and are moving around in it. It is therefore time to empty the box.
