It is never enjoyable to acknowledge a sound on your car that you don’t know where it comes from. You may be wondering what to do when you detect a reversing gear noise that continues on your Mercury Milan? Any gearbox issue can be important, but before making sure, it is better to do a few investigations. Our team has created this content page to help you deal with it. First, we will see what the sources and the different gearbox noises can be on Mercury Milan, and second, what are the solutions available to you.
Classical reverse Mercury Milan noises and some tips to maintain your gearbox
Why does the reversing of my Mercury Milan make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult exercise. The noise created by the reversing of your Mercury Milan is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears more quiet than with spur gears employed for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the car in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the car is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. In fact, the pressure you will apply on the gears will be significant and you will create a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely usual if you find out a reverse noise on your Mercury Milan if you shift gear under these conditions.
Diverse Mercury Milan reversing noises and their triggers
Finally in this section, we will move on to what you are probably most enthusiastic about in this content, to find out about the source of reversing noise on Mercury Milan. Here are the 3 typical noises you may be victim of.
I hear a grinding noise when starting in reverse gear
If you acknowledge a grinding noise when you start in reverse with your Mercury Milan, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore plausible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to read this content for more info about strut mount noises on Mercury Milan.
An increased reverse knocking noise on Mercury MilanX
If you are subject to a knocking noise when you are in reverse with your Mercury Milan and this noise tends to build up as you gain speed. It is plausible that you are experiencing a serious issue that needs to be solved very fast before wrecking your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears very fast. Take your car to your auto mechanic quickly or read this article about gearbox noise on Mercury Milan for more data.
I perceive a noise when I go in reverse
Listening a noise when you shift into reverse is normal and relating to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Mercury Milan reverse gear makes more noise than before, it is plausible that filings have been produced and are moving around in it. It is therefore time to empty the box.
