It is never pleasing to perceive a sound on your automobile that you don’t know where it comes from. You may be thinking what to do when you detect a reversing gear noise that continues on your Acura TL? Any gearbox trouble can be severe, but before making sure, it is better to do a few inspections. Our team has made this content page to support you eliminate it. First, we will see what the origins and the different gearbox noises can be on Acura TL, and second, what are the solutions available to you.
Classical reverse Acura TL noises and some tips to look after your gearbox
Why does the reversing of my Acura TL make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult exercise. The noise made by the reversing of your Acura TL is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears more quiet than with spur gears employed for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. In fact, the pressure you will exert on the gears will be monumental and you will make a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely typical if you notice a reverse noise on your Acura TL if you shift gear under these conditions.
Different Acura TL reversing noises and their triggers
Finally in this section, we will move on to what you are probably most excited about in this article, to find out about the origin of reversing noise on Acura TL. Here are the 3 typical sounds you may be victim of.
I experience a grinding noise when starting in reverse gear
If you perceive a grinding noise when you start in reverse with your Acura TL, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore plausible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to browse this document for more info about strut mount noises on Acura TL.
An increased reverse knocking noise on Acura TLX
If you are subject to a knocking noise when you are in reverse with your Acura TL and this noise tends to amplify as you gain speed. It is plausible that you are experiencing a serious trouble that needs to be resolved fairly quickly before wrecking your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears in short order. Take your automobile to your mechanic quickly or read this content page about gearbox noise on Acura TL for more data.
I acknowledge a noise when I go in reverse
Listening a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Acura TL reverse gear makes more noise than before, it is plausible that filings have been made and are moving around in it. It is therefore time to empty the box.
