Being subject to recurring noise on your automobile tends to be frustrating, a automobile is so complex that it is constantly difficult to find its origin and even more so to find the part that causes it. If you have already experienced a clicking noise on your Acura TL, we will almost certainly be able to help you. Indeed, our editorial staff decided to create this content page in order to review the main causes of a clicking noise on Acura TL. This is why, firstly, we will check out what are the origins of this type of noise coming from your engine block, then those of a noise coming from your direction and finally, the origins of clicking noise on Acura TL coming from your suspensions.clicking-noise-acura-tl

I discover a clicking noise on Acura TL on my engine

Check your high engine

If you discover a clicking noise on Acura TL, and this noise is based at the top of the engine, it means that it originates from your cylinder head and its accompanying parts. Two parts can be the triggers of these ticking noises on Acura TL. Either the hydraulic pushers , in general it is because of their faulty “hydraulic catch-up” system that we will find out these clicking noises, often when cold and disappear when hot. Otherwise, it is the interplay of your rocker arms or their state of wear that is at issue. In this circumstance, remember to change them.

Check your low engine

If you have distinguished the zone of source of the Acura TL clikcing noises coming from your low engine, it may be that your rods or piston shafts are the triggers. In both situations, the risk in the long term is the breakage of the motor. These two repairs are very complicated and most mechanics will recommend you to swap the engine of your Acura TL.

Combustion problem

Finally, if you have the feeling that this clicking noise on Acura TL is in connection with the combustion of your engine, there are three possible reasons of it. Check the condition of your glow plugs which, if worn, can hinder the proper combustion of the fuel mixture. Then, it is conceivable that your timing belt is shifted and that it does not properly manage the timing of the various engine parts to promote good combustion. And finally, the most classic reason, comes from your injection, which is either blocked or one or more injectors are damaged. In this case, do not hesitate to check this content page which deals in detail with the different injection sounds on Acura TL.

I discover a clicking noise on Acura TL in my direction

Check the condition of the gimbals

One of the most basic reasons of a clicking noises in the direction of your Acura TL is connected to the direction of the automobile. Indeed, the cardans and their bellows are parts that are constantly stressed during your changes of direction or that you turn your wheels and a wear of one of them can generate a ticking type of sound when you approach the stop zone of your steering. A bellows with holes will affect the cardan shaft very quickly and must be swapped rapidly, otherwise the entire cardan shaft will have to be swapped. Consider taking a look at it. If you would like more detailed information about gimbals noises on Acura TL, do not hesitate to read this complete guide.

Check the rest of your direction

Finally, when you detect a clicking noise on your Acura TL, it is conceivable that it is the direction that is involved. Just like the gimbals, the steering part is mobilized when you turn your wheels. If this is the case, the parts that may have been damaged due to normal wear and tear or impact (e. g. sidewalks) are steering rods, stabilizer bar silentblocks or steering triangles.

I discover a clicking noise on Acura TL coming from my suspensions

Check the suspension

If you encounter a clicking noise on your Acura TL once you pass a speed bump, it is extremely conceivable that your suspension block is the cause of the noise. Indeed, it may be the suspension cups, which, when they are dead, have the rubber (silentbloc) that acts as a buffer and shock absorber for the upper part of the suspension that no longer fulfils its task and during small jolts that compress the suspensions. To check if this is the issue that concerns you, take a dented road and, at low speed, pay attention to the noise coming from your front axle when ever you pass over holes. If these are the cups, consider changing them quickly as this may affect other parts and require more expensive repairs.

Check spring and cylinder

If you hear a clicking noise on your Acura TL at the suspension level, it is widely conceivable that spring wear or shock cylinder deformation may be a explanation. To check the shape of the spring, place the vehicle on a flat surface and measure that the heights from the ground to the bottom of the body are identical on each side (empty car for measurement). You can also check between the front and rear, if there is a gap too large it suggests that that most likely your springs are worn, if you find out a leak go a little further in the article to have the answer to this problem. For the cylinder the verification is visual, make sure that it seems to work in a straight axis. And that there is no angle that would alter its proper functioning. If one of them breaks in both situations, you should think about changing it or them. If you have the feeling that this noise is more like a squeaking noise on Acura TL than a clicking noise, don’t hesitate to consult this article.