It is never pleasing to acknowledge a sound on your automobile that you don’t know where it comes from. You may be questioning what to do when you identify a reversing gear noise that persists on your Chrysler 200? Any gearbox trouble can be severe, but before making sure, it is better to do a few checks. Our team has written this document to support you deal with it. First, we will see what the origins and the different gearbox noises can be on Chrysler 200, and second, what are the solutions available to you.
Classical reverse Chrysler 200 noises and some tips to preserve your gearbox
Why does the reversing of my Chrysler 200 make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult task. The noise generated by the reversing of your Chrysler 200 is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears more quiet than with spur gears employed for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Indeed, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. Indeed, the pressure you will apply on the gears will be monumental and you will create a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely usual if you listen to a reverse noise on your Chrysler 200 if you shift gear under these conditions.
Several Chrysler 200 reversing noises and their causes
Finally in this section, we will move on to what you are probably most curious about in this page, to find out about the origin of reversing noise on Chrysler 200. Here are the 3 typical sounds you may be victim of.
I notice a grinding noise when starting in reverse gear
If you acknowledge a grinding noise when you start in reverse with your Chrysler 200, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore plausible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to browse this article for more information about strut mount noises on Chrysler 200.
An increased reverse knocking noise on Chrysler 200X
If you are subject to a knocking noise when you are in reverse with your Chrysler 200 and this noise tends to increase as you gain speed. It is plausible that you are going through a serious trouble that needs to be resolved rather quickly before ruining your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears very fast. Take your automobile to your auto technician quickly or browse this content page about gearbox noise on Chrysler 200 for more details.
I listen to a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and related to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Chrysler 200 reverse gear makes more noise than before, it is plausible that filings have been produced and are moving around in it. It is therefore time to empty the box.
