It is never pleasurable to hear a sound on your vehicle that you don’t know where it comes from. You may be thinking about what to do when you notice a reversing gear noise that continues on your Chevrolet Traverse? Any gearbox trouble can be severe, but before making sure, it is better to do a few inspections. Our team has made this document to support you deal with it. First, we will see what the origins and the different gearbox noises can be on Chevrolet Traverse, and second, what are the solutions available to you.
Classical reverse Chevrolet Traverse noises and some tips to look after your gearbox
Why does the reversing of my Chevrolet Traverse make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult task. The sound generated by the reversing of your Chevrolet Traverse is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears used for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Indeed, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad practice. Indeed, the pressure you will apply on the gears will be significant and you will generate a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely normal if you experience a reverse noise on your Chevrolet Traverse if you shift gear under these conditions.
Several Chevrolet Traverse reversing noises and their triggers
Finally in this section, we will move on to what you are probably most curious about in this document, to find out about the source of reversing noise on Chevrolet Traverse. Here are the 3 typical noises you may be victim of.
I notice a grinding noise when starting in reverse gear
If you hear a grinding noise when you start in reverse with your Chevrolet Traverse, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to browse this content for more info about strut mount noises on Chevrolet Traverse.
An increased reverse knocking noise on Chevrolet TraverseX
If you are subject to a knocking noise when you are in reverse with your Chevrolet Traverse and this noise tends to build up as you gain speed. It is conceivable that you are confronting a serious trouble that needs to be fixed right away before ruining your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears in short order. Take your vehicle to your technician quickly or read this document about gearbox noise on Chevrolet Traverse for more data.
I discover a noise when I go in reverse
Hearing a noise when you shift into reverse is normal and related to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Chevrolet Traverse reverse gear makes more noise than before, it is conceivable that filings have been made and are moving around in it. It is therefore time to empty the box.
