It is never relaxing to discover a noise from your car you don’t know where from. Then what if you identify a serpentine belt noise that lasts on your Fiat 500 X? It is highly conceivable that this is a minor trouble, but before being sure, it is better to execute some inspections. If this belt noise comes from your serpentine or driving belt, our team has written a document to help you finding and solving it. First, we will look at the serpentine belt noises on your Fiat 500 X and then we will look at the sources of these sounds.
I encounter noises from serpentine belt Fiat 500 X
The best method to control the state of your belts is to listen to your vehicle. As soon as you recognize sounds such as squealing or bells, you should take a closer look to check their source. The task of the serpentine belt or driving belt of your Fiat 500 X is to transfer the movement of the engine to the secondary components that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore important in the normal use of your vehicle. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive distinctive engine components at variable speeds.
I discover squealing noises on my serpentine belt Fiat 500 X
This kind of squealing belt noises on Fiat 500 X, which will often be acute, can in most cases appear when the engine is cold, or when the acceleration increases in intensity. . This kind of noise must be heavy and it is often quite simple to relate it with one of these belts. To check, do not hesitate to open your bonnet, engine running cold and check the source of this noise, the serpentine or driving belt being visible, it should not be too complicated for you to locate a belt noise on your Fiat 500 X. The reason of this trouble can be connected to the damper pulley, which works as a damper to reduce irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have an opportunity that this event is annodine. As the serpentine belt of your Fiat 500 X is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Keep in mind to check the state of your belt (crack, crack), if this is the case replace it, otherwise simply tighten the belt.
I discover loud serpentine or driving belt noises Fiat 500 X
Just like squealing, a driving belt noise on your Fiat 500 X that sounds like a loud grinding sound can express a lot about its state. It is therefore essential that you look further and locate the reason for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the source of this trouble. Make sure to check first the serpentine/driving belt which in most cases is the reason of this trouble, otherwise it will be necessary to replace the tensioner or pulley.
I discover bearing noises on the serpentine belt of my Fiat 500 X
Finally, if in your case you distinguish a bearing belt noise on Fiat 500 X, it is conceivable that it is connected to a serpentine belt that is too tight . Indeed, it is conceivable that its size may be smaller than prescribed and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to replace it if it is too short. If after checking all thoses possibilities, you still notice a belt noises, read our article about timing belt noises on Fiat 500 X which could maybe help you.
