It is never relaxing to discover a noise from your car you don’t know where from. So what if you notice a serpentine belt noise that persists on your Hyundai Veloster? It is highly plausible that this is a minimal issue, but before being sure, it is better to execute some checks. If this belt noise comes from your serpentine or driving belt, our team has written a post to support you finding and correcting it. First, we will look at the serpentine belt noises on your Hyundai Veloster and then we will take a look at the sources of these noises.
I encounter noises from serpentine belt Hyundai Veloster
The best strategy to control the state of your belts is to listen to your vehicle. Immediately after you notice noises such as squealing or bells, you should take a closer look to verify their origin. The function of the serpentine belt or driving belt of your Hyundai Veloster is to transmit the movement of the engine to the secondary elements that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore essential in the normal functionality of your vehicle. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive distinctive engine elements at variable speeds.
I discover squealing noises on my serpentine belt Hyundai Veloster
This sort of squealing belt noises on Hyundai Veloster, which will often be acute, can generally happen when the engine is cold, or when the acceleration increases in intensity. . This sort of noise must be heavy and it is normally quite simple to link it with one of these belts. To verify, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being exposed, it should not be too difficult for you to locate a belt noise on your Hyundai Veloster. The reason of this issue can be related to the damper pulley, which operates as a damper to eliminate irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the possibility that this phenomenon is annodine. As the serpentine belt of your Hyundai Veloster is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Keep in mind to verify the state of your belt (crack, crack), if this is the case replace it, otherwise simply tighten the belt.
I discover loud serpentine or driving belt noises Hyundai Veloster
Just like squealing, a driving belt noise on your Hyundai Veloster that sounds like a loud grinding sound can say a lot about its state. It is therefore essential that you look further and locate the reason for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other alternatives, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this issue. Don’t forget to verify first the serpentine/driving belt which in most cases is the reason of this issue, otherwise it will be necessary to replace the tensioner or pulley.
I discover bearing noises on the serpentine belt of my Hyundai Veloster
Finally, if in your case you distinguish a bearing belt noise on Hyundai Veloster, it is plausible that it is related to a serpentine belt that is too tight . Indeed, it is plausible that its size may be smaller than prescribed and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to replace it if it is too short. If after checking all thoses alternatives, you still perceive a belt noises, read our article about timing belt noises on Hyundai Veloster which could maybe help you.
