It is never pleasurable to hear a noise from your car you don’t know where from. So what if you notice a serpentine belt noise that lasts on your Dodge Avenger? It is extremely conceivable that this is a minor issue, but before being sure, it is better to conduct some inspections. If this belt noise comes from your serpentine or driving belt, our team has written a post to support you locating and solving it. First, we will look at the serpentine belt noises on your Dodge Avenger and then we will take a look at the sources of these noises.
I experience noises from serpentine belt Dodge Avenger
The best way to check the condition of your belts is to listen to your automobile. Immediately after you find noises such as squealing or bells, you should take a closer look to verify their origin. The role of the serpentine belt or driving belt of your Dodge Avenger is to transmit the movement of the engine to the secondary parts that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore important in the normal operation of your automobile. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive different engine parts at variable speeds.
I hear squealing noises on my serpentine belt Dodge Avenger
This type of squealing belt noises on Dodge Avenger, which will often be acute, can generally happen when the engine is cold, or when the acceleration increases in intensity. . This type of sound must be heavy and it is normally quite simple to relate it with one of these belts. To verify, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being accessible, it should not be too difficult for you to spot a belt noise on your Dodge Avenger. The reason of this issue can be in connection with the damper pulley, which acts as a damper to get rid of irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the opportunity that this event is annodine. As the serpentine belt of your Dodge Avenger is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Remember to verify the condition of your belt (crack, crack), if this is the case swap it, otherwise simply tighten the belt.
I hear loud serpentine or driving belt noises Dodge Avenger
Just like squealing, a driving belt noise on your Dodge Avenger that sounds like a loud grinding sound can express a lot about its condition. It is therefore imperative that you look further and find the cause for this sound that can signal the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other alternatives, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this issue. Remember to verify first the serpentine/driving belt which in most cases is the reason of this issue, otherwise it will be necessary to swap the tensioner or pulley.
I hear bearing noises on the serpentine belt of my Dodge Avenger
Finally, if in your case you distinguish a bearing belt noise on Dodge Avenger, it is conceivable that it is in connection with a serpentine belt that is too tight . Indeed, it is conceivable that its size may be smaller than recommended and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to replace it if it is too short. If after checking all thoses alternatives, you still perceive a belt noises, read our article about timing belt noises on Dodge Avenger which could maybe help you.
