It is never pleasant to find out a noise from your car you don’t know where from. Then what if you locate a serpentine belt noise that stays on your Hyundai Santa Fe? It is very plausible that this is a minor problem, but before being sure, it is better to conduct some investigations. If this belt noise comes from your serpentine or driving belt, our team has written a page to support you finding and repairing it. First, we will look at the serpentine belt noises on your Hyundai Santa Fe and then we will check out the sources of these noises.
I encounter noises from serpentine belt Hyundai Santa Fe
The best strategy to check the state of your belts is to listen to your automobile. Immediately after you perceive noises such as squealing or bells, you should take a closer look to verify their origin. The function of the serpentine belt or driving belt of your Hyundai Santa Fe is to transmit the movement of the engine to the secondary components that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore vital in the normal performance of your automobile. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the capacity to drive distinctive engine components at variable speeds.
I find out squealing noises on my serpentine belt Hyundai Santa Fe
This sort of squealing belt noises on Hyundai Santa Fe, which will often be acute, can in most cases appear when the engine is cold, or when the acceleration increases in intensity. . This sort of noise must be heavy and it is often quite simple to link it with one of these belts. To verify, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being apparent, it should not be too difficult for you to locate a belt noise on your Hyundai Santa Fe. The reason of this problem can be in connection with the damper pulley, which acts as a damper to eradicate irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the opportunity that this event is annodine. As the serpentine belt of your Hyundai Santa Fe is exposed, it may squeak due to excessive humidity due to weather conditions and it may end with a change in conditions. Keep in mind to verify the state of your belt (crack, crack), if this is the case change it, otherwise simply tighten the belt.
I find out loud serpentine or driving belt noises Hyundai Santa Fe
Just like squealing, a driving belt noise on your Hyundai Santa Fe that sounds like a loud grinding sound can express a lot about its state. It is therefore necessary that you look further and locate the cause for this sound that can signal the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven properly. Other alternatives, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this problem. Make sure you verify first the serpentine/driving belt which in most cases is the reason of this problem, otherwise it will be necessary to change the tensioner or pulley.
I find out bearing noises on the serpentine belt of my Hyundai Santa Fe
Finally, if in your case you identify a bearing belt noise on Hyundai Santa Fe, it is plausible that it is in connection with a serpentine belt that is too tight . Indeed, it is plausible that its size may be smaller than recommended and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to replace it if it is too short. If after checking all thoses alternatives, you still notice a belt noises, read our article about timing belt noises on Hyundai Santa Fe which could maybe help you.
