It is never pleasant to notice a noise from your car you don’t know where from. Thus what if you identify a serpentine belt noise that lasts on your Honda CR V? It is extremely possible that this is a unimportant issue, but before being sure, it is better to operate some checks. If this belt noise comes from your serpentine or driving belt, our team has written a document to help you locating and repairing it. First, we will look at the serpentine belt noises on your Honda CR V and then we will take a look at the sources of these noises.
I encounter noises from serpentine belt Honda CR V
The best technique to control the condition of your belts is to listen to your car. As soon as you recognize noises such as squealing or bells, you should take a closer look to verify their source. The role of the serpentine belt or driving belt of your Honda CR V is to transmit the movement of the engine to the secondary components that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore critical in the normal operation of your car. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive different engine components at variable speeds.
I notice squealing noises on my serpentine belt Honda CR V
This type of squealing belt noises on Honda CR V, which will often be acute, can generally arise when the engine is cold, or when the acceleration increases in intensity. . This type of noise must be heavy and it is obviously quite simple to relate it with one of these belts. To verify, do not hesitate to open your bonnet, engine running cold and check the source of this noise, the serpentine or driving belt being visible, it should not be too difficult for you to locate a belt noise on your Honda CR V. The cause of this issue can be related to the damper pulley, which operates as a damper to reduce irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have a chance that this event is annodine. As the serpentine belt of your Honda CR V is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Keep in mind to verify the condition of your belt (crack, crack), if this is the case replace it, otherwise simply tighten the belt.
I notice loud serpentine or driving belt noises Honda CR V
Just like squealing, a driving belt noise on your Honda CR V that sounds like a loud grinding sound can reveal a lot about its condition. It is therefore essential that you look further and locate the reason for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the source of this issue. Make sure to verify first the serpentine/driving belt which in most cases is the cause of this issue, otherwise it will be necessary to replace the tensioner or pulley.
I notice bearing noises on the serpentine belt of my Honda CR V
Finally, if in your case you identify a bearing belt noise on Honda CR V, it is possible that it is related to a serpentine belt that is too tight . Indeed, it is possible that its size may be smaller than suggested and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The problem in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to swap it if it is too short. If after checking all thoses possibilities, you still perceive a belt noises, read our article about timing belt noises on Honda CR V which could maybe help you.
