It happens sometimes that your automobile makes noises in the brake calipers, you are certainly not reassured by this sorts of noise and you immediately tend to think that you will have an incident or that the fix will cost you an astronomical amount. So, what if you identify noise from the brake calipers on your Mitsubishi Outlander? It may not be anything major and you may be able to solve it yourself, but when in doubt, since your safety and the one of others is in question, it is better to examine before a more serious failure occurs. It is with this in mind that we have made the decision to write this document and give you the chance to find the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Mitsubishi Outlander, and give you the causes for them in order to help you fix the trouble.
The different types of brake caliper noise on Mitsubishi Outlander and their causes
The function of the Mitsubishi Outlander brake calipers is to come pinch the brake discs of your Mitsubishi Outlander thanks to the pads they will activate. This element is an essential element of your vehicle’s safety. Hearing a sound from it must therefore be looked into immediately and leaving it lying around is not a good choice.
I hear a grinding noise on my brake calipers on Mitsubishi Outlander
If you perceive a grinding or scrap metal noise coming from the brake calipers of your Mitsubishi Outlander, it is highly imaginable that it will be linked to brake pads at the end of their life, actually, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each producer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may differ. Remove the wheels in question and check the wear indicator on them. If they are out of date, they must be replaced quickly as they will promptly ruin your discs and keep doing this scrap or grinding noise on Mitsubishi Outlander. If after checking this point, you’re still enduring a grinding noise on your Mitsubishi Outlander, have a look at this article to find a solution.
I encounter a constant noise that stops when I brake from my Mitsubishi Outlander brake calipers
If you are the victim of a regular noise in the brake calipers of your Mitsubishi Outlander that only stops when you press your brake system, it is quite possible that caliper wear is the reason. Indeed, they can jam with time, especially if they are not employed enough. In this case, they will tend to remain in the closed situation, so they will always stick the pads against the discs, which will lead to an rise in consumption and premature deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Mitsubishi Outlander
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Mitsubishi Outlander, you will have to worry about the state of your discs. Discs tend to wear over time and although they have a much longer life than pads, they must be replaced at some point. A vibration most often shows of veiled brake disc, you can check it by disassembling your wheels. If so, change them or have them replaced by your mechanic.
When I brake, I encounter a squealing in my brake calipers of my Mitsubishi Outlander
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Mitsubishi Outlander, causing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
