It is never agreeable to hear new sounds on your car. We generally tend to get worried and think about the worst. But hearing wheel noise on Volkswagen Polo is very often linked to small problems that you can easily resolve. To help you in this examination, our team decided to write this content to make your life easier and help you in this challenge. To do this, we will alternately see what are the distinctive noises that Volkswagen Polo wheels can induce and to which failures they are linked.
The diverse wheel noises on Volkswagen Polo and their origins
We will therefore look into the different types of sound you may experience and their origins.
I acknowledge grinding wheel noise on Volkswagen Polo from, cardan shaft
The first possibility of grinding wheel noise on your Volkswagen Polo is that you feel a gimbal sound when you are turning significantly, usually at low speed. It is also plausible that you may experience this sound when you drive over speed bumps. You should notice a noise close to a cracking . It is quite plausible in this situation that one or more bellows of your gimbals are dead. In this case, the joint must be damaged and the transmission may fail. Check the state of the joint bellows and replace them if required or risk having your car immobilized. If they have cracks, they will in the near future dry out and fill with dust or stones that will quickly damage the cardan shaft itself, don’t wait to act! In case you have a sound when you pass on damaged roads but the gimbals are not responsible, read this article about suspension noise on Volkswagen Polo to help you find a solution.
I hear a wheel noise Volkswagen Polo when coasting due to a bearing
One of the other possible causes of signs on the front wheel of your Volkswagen Polo when coasting, may be that one of your bearing is nearly dead, it will tend to generate a thumping sound that intensifies when it is stressed (turns faster and faster). So be sure to examine by taking speed (neutral and window open to hear only the noise of the wheels) that the sound is well located here, if this is the case replace it or them quickly. If, on the other hand, this noise only shows up itself with an engaged speed, read this article about loud noises on Volkswagen Polo, you will most likely find a resolution to your issue.
I experience a wheel noise Volkswagen Polo due to brakes
If you perceive noise from one or both of your wheels, it is highly plausible that it is your pads or discs that are the trigger. Indeed, a disc or a set of dead plates will create a loud metallic sound that you will obviously feel. To examine this, put your car on axle stands, and control the state of your discs and pads by taking out the wheel. If they are involved, replace them promptly , otherwise you will no longer be able to brake. If you experience a metallic noise from your Volkswagen Polo, but the brakes are not the cause, browse this article for more details on this issue.
I find out a wheel noise Volkswagen Polo linked to faulty wheel alingment
If you experience a sound that may look like a vibration and will accentuate as you increase speed, it is plausible that your wheel alingment or balancing is the reason of it. Wheel alingment of a car is a major step that is generally done after each tire change. It will ensure that the wheel rotates in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and induce a significant wheel noise on Volkswagen Polo. Verify that your seals are still in place, otherwise go to your mechanic.
I notice a wheel noise Volkswagen Polo linked to wishbone
Finally, you may notice a noise on your Volkswagen Polo at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the cause of this issue comes from the double wishbone suspension or the direction hinges. Indeed, you will be able to test a damaged double suspension wishbone while accelerating when it will be pushed on side and the car will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also examine the condition of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your mechanic.
