It appears in some cases that your automobile makes noises in the brake calipers, you are pretty much never reassured by this types of noise and you immediately tend to think that you will have an accident or that the fix will cost you an astronomical amount. So, what if you detect noise from the brake calipers on your Mazda CX 5? It might not be anything severe and you may be able to solve it yourself, but when in doubt, since your safety and the one of others is in question, it is better to check before a more serious failure occurs. It is with this in mind that we have chosen to compose this article and give you the opportunity to locate the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Mazda CX 5, and give you the explanations for them in order to help you resolve the problem.
The different types of brake caliper noise on Mazda CX 5 and their causes
The function of the Mazda CX 5 brake calipers is to come pinch the brake discs of your Mazda CX 5 thanks to the pads they will activate. This element is an important element of your vehicle’s safety. Discovering a sound from it must therefore be examined immediately and leaving it lying around is not a good answer.
I hear a grinding noise on my brake calipers on Mazda CX 5
If you hear a grinding or scrap metal noise coming from the brake calipers of your Mazda CX 5, it is highly possible that it will be caused by brake pads at the end of their existence, in fact, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but according to your driving style and route, this may differ. Remove the wheels in question and check the wear indicator on them. If they are expired, they must be replaced quickly as they will very easily damage your discs and keep doing this scrap or grinding noise on Mazda CX 5. If after checking this point, you’re still going through a grinding noise on your Mazda CX 5, have a look at this article to find a solution.
I experience a frequent noise that stops when I brake from my Mazda CX 5 brake calipers
If you are the victim of a constant noise in the brake calipers of your Mazda CX 5 that only stops when you press your brake system, it is quite possible that caliper wear is the cause. In fact, they can jam with time, specifically if they are not used enough. In such a case, they will tend to remain in the closed situation, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and premature deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Mazda CX 5
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Mazda CX 5, you will have to feel concerned about the state of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be changed at some point. A vibration most often informs of veiled brake disc, you can check it by removing your wheels. If so, replace them or have them replaced by your mechanic.
When I brake, I experience a squealing in my brake calipers of my Mazda CX 5
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Mazda CX 5, causing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
