It is never pleasing to find out new noises on your automobile. We usually tend to get worried and think about the most extreme. But experiencing wheel noise on Ford Focus is very often linked to small problems that you can easily resolve. To assist you in this investigation, our team decided to compose this article to make your life easier and help you in this challenge. To do this, we will alternately see what are the distinctive noises that Ford Focus wheels can induce and to which failures they are linked.
The different wheel noises on Ford Focus and their sources
We will therefore concentrate on the different types of noise you may feel and their sources.
I perceive grinding wheel noise on Ford Focus from, cardan shaft
The first possibility of grinding wheel noise on your Ford Focus is that you feel a gimbal noise when you are turning significantly, usually at low speed. It is also possible that you may feel this noise when you drive over speed bumps. You should encounter a noise close to a cracking . It is quite possible in this case that one or more bellows of your gimbals are dead. In this case, the joint must be destroyed and the transmission may fail. Check the state of the joint bellows and change them if needed or risk having your automobile immobilized. If they have cracks, they will quickly dry out and fill with dust or stones that will fairly quickly affect the cardan shaft itself, don’t wait to act! In case you have a noise when you pass on damaged roads but the gimbals are not the reason of it, read this article about suspension noise on Ford Focus to help you find a solution.
I acknowledge a wheel noise Ford Focus when coasting connected to a bearing
One of the other probable origins of symptoms on the front wheel of your Ford Focus when coasting, may be that one of your bearing is good to be replaced, it will tend to produce a thumping noise that intensifies when it is stressed (turns faster and faster). So remember to verify by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case change it or them before long. If, on the other hand, this noise only shows up itself with an engaged speed, read this article about loud noises on Ford Focus, you will most likely find a solution to your issue.
I find out a wheel noise Ford Focus connected to brakes
If you experience noise from one or both of your wheels, it is highly possible that it is your pads or discs that are the cause. Indeed, a disc or a set of dead plates will make a loud metallic noise that you will surely feel. To verify this, put your automobile on axle stands, and check the state of your discs and pads by removing the wheel. If they are involved, change them rather quickly , otherwise you will no longer be able to brake. If you feel a metallic noise from your Ford Focus, but the brakes are not the cause, read this article for more information on this issue.
I acknowledge a wheel noise Ford Focus caused by faulty wheel alingment
If you feel a noise that may look like a vibration and will increase as you increase speed, it is possible that your wheel alingment or balancing is the origin of it. Wheel alingment of a automobile is a fundamental step that is generally done after each tire change. It will ensure that the wheel rotates in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and induce a significant wheel noise on Ford Focus. Verify that your seals are still set up, otherwise go to your garage.
I listen to a wheel noise Ford Focus due to wishbone
Finally, you may have a noise on your Ford Focus at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the cause of this issue comes from the double wishbone suspension or the direction hinges. Indeed, you will be able to test a damaged double suspension wishbone when you are accelerating when it will be pushed on side and the vehicle will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also verify the condition of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your auto technician.
